Following Cadence Design Systems’ acquisition of the Design & Engineering (D&E) business, the D&E Community Forum on the Nexus Community Center has been migrated in the Cadence Physical System Simulation Community. For more details and if you have any questions, please refer to the FAQ.

Stats

  • State Not Answered
  • Replies 10
  • Subscribers 1
  • Views 6
  • Members are here 0
More Content

Wheel offset?

Jesper Slattengren
So when I modify the tire/wheel, there is a field for wheel_offset. Which makes perfect sense. The wheel center is a design position on the intersection between the spin axis and the mating surface where the wheel is bolted on. On this design, different wheels can be used with different offsets. That will among other things change the scrub radius.
The problems are
  1. This parameter is not used by anything. Changing it does not move the tire in or out.
  2. Using the suspension testrig, there is nowhere to set this parameter. As this is using a testrig tire that does not expose this parameter. I can change it by manually search for this variable and change it. But it looks like an oversight. And it does not change the scrub radius or anything else in the simulation
 
OK, it is easy to fix for the full vehicle tire template, but it seems wrong to me.
 
Anyone else looked into this? @Martin Kieltsch​ you must have fixed this?
Parents
  • 0
    Concerning the variable set by the wheel modify dbox:
    .ACAR.macros.mac_tem_whe_smo is setting $wheel.center_offset
    That's only used in $wheel.geo_ctr which is (according to database navigator) which is only used by "$wheel.wheel_hub.cm"
    WheelHubInfo
     
    Just that there is no $wheel.wheel_hub.cm as wheel_hub is a cylinder and not a part.
    Without digging deeper, I simply assume
    that the intended behaviour was to move $wheel.cm and as a consequence it'd be bug.
Reply
  • 0
    Concerning the variable set by the wheel modify dbox:
    .ACAR.macros.mac_tem_whe_smo is setting $wheel.center_offset
    That's only used in $wheel.geo_ctr which is (according to database navigator) which is only used by "$wheel.wheel_hub.cm"
    WheelHubInfo
     
    Just that there is no $wheel.wheel_hub.cm as wheel_hub is a cylinder and not a part.
    Without digging deeper, I simply assume
    that the intended behaviour was to move $wheel.cm and as a consequence it'd be bug.
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.