Following Cadence Design Systems’ acquisition of the Design & Engineering (D&E) business, the D&E Community Forum on the Nexus Community Center has been migrated in the Cadence Physical System Simulation Community. For more details and if you have any questions, please refer to the FAQ.

Stats

More Content

Can someone suggest me the easiest way or the flow chart of converting a demo vehicle into an All Wheel Drive vehicle?

rohan.tiwari
Can someone suggest me the easiest way or the flow chart of converting a demo vehicle into an All Wheel Drive vehicle?
Parents
  • 0
    It actually Looks not so bad, not being ironic
     
    What you Need to do still is to Change the Name of the Communicators and also role
     
    to Elaborate more: you only have one powertrain and you cannot create two Communicators with the exact same Name in one template, therefor you Need to create the Output Communicator co[rl]_tripot_to_differential_front with a front role obviously and then modify the existing Communicator for the tripot to co[rl]_tripot_to_differential_rear (don't Forget to also Change the matching Name by adding _rear to it)
     
    Then I think you Need to modify the existing Communicators in the double wishbone templates to match your powertrain Communicators (i.e the front and rear role as well)
     
    To save time, always use the test Communicators function to make sure you don't waste time on opening and Assembling parts
     
     
    best of luck !
Reply
  • 0
    It actually Looks not so bad, not being ironic
     
    What you Need to do still is to Change the Name of the Communicators and also role
     
    to Elaborate more: you only have one powertrain and you cannot create two Communicators with the exact same Name in one template, therefor you Need to create the Output Communicator co[rl]_tripot_to_differential_front with a front role obviously and then modify the existing Communicator for the tripot to co[rl]_tripot_to_differential_rear (don't Forget to also Change the matching Name by adding _rear to it)
     
    Then I think you Need to modify the existing Communicators in the double wishbone templates to match your powertrain Communicators (i.e the front and rear role as well)
     
    To save time, always use the test Communicators function to make sure you don't waste time on opening and Assembling parts
     
     
    best of luck !
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.