Following Cadence Design Systems’ acquisition of the Design & Engineering (D&E) business, the D&E Community Forum on the Nexus Community Center has been migrated in the Cadence Physical System Simulation Community. For more details and if you have any questions, please refer to the FAQ.

Stats

More Content

Can someone suggest me the easiest way or the flow chart of converting a demo vehicle into an All Wheel Drive vehicle?

rohan.tiwari
Can someone suggest me the easiest way or the flow chart of converting a demo vehicle into an All Wheel Drive vehicle?
Parents
  • 0
    Hello, thank you for your reply.
    that worked perfectly, but i don't know why it is not simulating,
    i am getting this error-
     
     
    FUNCTION : VAR1251
    PROBLEMS GETTING TIRE PARAMETER
    VARIABLE ID : 7
    TIRE ID : 1
    ** STOPPING ADAMS SOLVER **
    Static Solution converged in 7 iterations
    Residual imbalance is less than 6.10733E-08
     
    End Static Solution
     
    Simulate status=0
     
    command: DEACTIVATE/JPRIM,ID=2
    Deactivated model.testrig.josinl_body_stake, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=3
    Deactivated model.testrig.josper_yaw_stake, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=5
    Deactivated model.test_five_FT.jolper_sse_jprim, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=6
    Deactivated model.test_five_FT.jorper_sse_jprim, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=7
    Deactivated model.five_six_RT.jolper_sse_jprim, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=8
    Deactivated model.five_six_RT.jorper_sse_jprim, force/torque values will be zero in function-expression references.
     
     
    fdm::ActVar
    Setting function on: driver_demand::clutch
    command: VARIABLE/96, FUNCTION=0.0
    command: ACTIVATE/JPRIM,ID=2
    command: ACTIVATE/SFORCE,ID=1
    command: ACTIVATE/JPRIM,ID=5
    command: ACTIVATE/JPRIM,ID=6
    command: ACTIVATE/JPRIM,ID=7
    command: ACTIVATE/JPRIM,ID=8
    command: DEACTIVATE/MOTION,ID=4
    Deactivated model.testrig.jms_steering_wheel_angle.motion, force/torque values will be zero in function-expression references.
     
    acar/vdm_gra_mod
     
    Setting gravity vector in g's to: 0.00000E+00 0.00000E+00 -1.00000E+00
    command: accgrav/igrav= 0.00000E+00,jgrav= 0.00000E+00,kgrav=-9.80665E+03
     
    Apply a two steps statics:
     
     
    Begin Static Solution
     
    *********************************************** >> A/Car-MS Error>> AMS_GET_TIREDATA : wrong input parameters *********************************************** MODULE A/Car-MS ERROR MESSAGE
    FUNCTION : VAR1251
    PROBLEMS GETTING TIRE PARAMETER
    VARIABLE ID : 6
    TIRE ID : 1
    ** STOPPING ADAMS SOLVER **
    *********************************************** >> A/Car-MS Error>> AMS_GET_TIREDATA : wrong input parameters *********************************************** MODULE A/Car-MS ERROR MESSAGE
    FUNCTION : VAR1251
    PROBLEMS GETTING TIRE PARAMETER
    VARIABLE ID : 7
    TIRE ID : 1
    ** STOPPING ADAMS SOLVER **
     
     
    ---- START: ERROR ----
    VARSUB(281, 1004, 811, 517, 517, 1) has been illegally defined. A new functional dependency on the measure
    DIF(-1) has been encountered during execution.
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Error call SYSFNC for DIFF in flt_whlvel.f
    ID = -1
     
     
    ---- END: ERROR ----
     
    Adams Solver (C++) run terminating due to STOP requested by user.
     
    Static Solution failed to converge
     
    End Static Solution
     
    Simulation failed
     
     
     
    ---- START: ERROR ----
    Sim/stat cannot be achieved ...Stopping in <apre_ssssta>
    ID = 1020
     
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
     
    Adams Solver (C++) run terminating due to STOP requested by user.
     
     
    ---- END: ERROR ----
     
    Termination status=-995
     
     
     
    ---- START: ERROR ----
    VARSUB(282, 1004, 800, 496, 496, 1) has been illegally defined. A new functional dependency on the measure
    DIF(-1) has been encountered during execution.
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Error call SYSFNC for DIFF in flt_whlvel.f
    ID = -1
     
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Unknown exception caught in SYSFNC
     
    ---- END: ERROR ----
     
     
    fdm::ActPoiTor
    Failed to get actuator force: rear_brake_torque::single_component_force
     
     
    ---- START: ERROR ----
    VARSUB(281, 1004, 811, 517, 517, 1) has been illegally defined. A new functional dependency on the measure
    DIF(-1) has been encountered during execution.
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Error call SYSFNC for DIFF in flt_whlvel.f
    ID = -1
     
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Unknown exception caught in SYSFNC
     
    ---- END: ERROR ----
     
     
    fdm::ActPoiTor
    Failed to get actuator force: rear_brake_torque::single_component_force
    Terminating Adams Car usersubs...
     
     
    Finished -----
    Elapsed time = 3.86s, CPU time = 1.47s, 38.00%
     
    Simulation is complete.
     
Reply
  • 0
    Hello, thank you for your reply.
    that worked perfectly, but i don't know why it is not simulating,
    i am getting this error-
     
     
    FUNCTION : VAR1251
    PROBLEMS GETTING TIRE PARAMETER
    VARIABLE ID : 7
    TIRE ID : 1
    ** STOPPING ADAMS SOLVER **
    Static Solution converged in 7 iterations
    Residual imbalance is less than 6.10733E-08
     
    End Static Solution
     
    Simulate status=0
     
    command: DEACTIVATE/JPRIM,ID=2
    Deactivated model.testrig.josinl_body_stake, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=3
    Deactivated model.testrig.josper_yaw_stake, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=5
    Deactivated model.test_five_FT.jolper_sse_jprim, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=6
    Deactivated model.test_five_FT.jorper_sse_jprim, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=7
    Deactivated model.five_six_RT.jolper_sse_jprim, force/torque values will be zero in function-expression references.
    command: DEACTIVATE/JPRIM,ID=8
    Deactivated model.five_six_RT.jorper_sse_jprim, force/torque values will be zero in function-expression references.
     
     
    fdm::ActVar
    Setting function on: driver_demand::clutch
    command: VARIABLE/96, FUNCTION=0.0
    command: ACTIVATE/JPRIM,ID=2
    command: ACTIVATE/SFORCE,ID=1
    command: ACTIVATE/JPRIM,ID=5
    command: ACTIVATE/JPRIM,ID=6
    command: ACTIVATE/JPRIM,ID=7
    command: ACTIVATE/JPRIM,ID=8
    command: DEACTIVATE/MOTION,ID=4
    Deactivated model.testrig.jms_steering_wheel_angle.motion, force/torque values will be zero in function-expression references.
     
    acar/vdm_gra_mod
     
    Setting gravity vector in g's to: 0.00000E+00 0.00000E+00 -1.00000E+00
    command: accgrav/igrav= 0.00000E+00,jgrav= 0.00000E+00,kgrav=-9.80665E+03
     
    Apply a two steps statics:
     
     
    Begin Static Solution
     
    *********************************************** >> A/Car-MS Error>> AMS_GET_TIREDATA : wrong input parameters *********************************************** MODULE A/Car-MS ERROR MESSAGE
    FUNCTION : VAR1251
    PROBLEMS GETTING TIRE PARAMETER
    VARIABLE ID : 6
    TIRE ID : 1
    ** STOPPING ADAMS SOLVER **
    *********************************************** >> A/Car-MS Error>> AMS_GET_TIREDATA : wrong input parameters *********************************************** MODULE A/Car-MS ERROR MESSAGE
    FUNCTION : VAR1251
    PROBLEMS GETTING TIRE PARAMETER
    VARIABLE ID : 7
    TIRE ID : 1
    ** STOPPING ADAMS SOLVER **
     
     
    ---- START: ERROR ----
    VARSUB(281, 1004, 811, 517, 517, 1) has been illegally defined. A new functional dependency on the measure
    DIF(-1) has been encountered during execution.
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Error call SYSFNC for DIFF in flt_whlvel.f
    ID = -1
     
     
    ---- END: ERROR ----
     
    Adams Solver (C++) run terminating due to STOP requested by user.
     
    Static Solution failed to converge
     
    End Static Solution
     
    Simulation failed
     
     
     
    ---- START: ERROR ----
    Sim/stat cannot be achieved ...Stopping in <apre_ssssta>
    ID = 1020
     
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
     
    Adams Solver (C++) run terminating due to STOP requested by user.
     
     
    ---- END: ERROR ----
     
    Termination status=-995
     
     
     
    ---- START: ERROR ----
    VARSUB(282, 1004, 800, 496, 496, 1) has been illegally defined. A new functional dependency on the measure
    DIF(-1) has been encountered during execution.
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Error call SYSFNC for DIFF in flt_whlvel.f
    ID = -1
     
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Unknown exception caught in SYSFNC
     
    ---- END: ERROR ----
     
     
    fdm::ActPoiTor
    Failed to get actuator force: rear_brake_torque::single_component_force
     
     
    ---- START: ERROR ----
    VARSUB(281, 1004, 811, 517, 517, 1) has been illegally defined. A new functional dependency on the measure
    DIF(-1) has been encountered during execution.
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Error call SYSFNC for DIFF in flt_whlvel.f
    ID = -1
     
     
    ---- END: ERROR ----
     
     
    ---- START: ERROR ----
    Unknown exception caught in SYSFNC
     
    ---- END: ERROR ----
     
     
    fdm::ActPoiTor
    Failed to get actuator force: rear_brake_torque::single_component_force
    Terminating Adams Car usersubs...
     
     
    Finished -----
    Elapsed time = 3.86s, CPU time = 1.47s, 38.00%
     
    Simulation is complete.
     
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.