Following Cadence Design Systems’ acquisition of the Design & Engineering (D&E) business, the D&E Community Forum on the Nexus Community Center has been migrated in the Cadence Physical System Simulation Community. For more details and if you have any questions, please refer to the FAQ.

Stats

More Content

Looking for the Adams Car Command Guide

Timothy Lynch

Is there an Adams Car Command Guide?

I'm looking from something similar to the one for Adams View located here:

nexus.hexagon.com/.../Adams_2024.1_Adams_View_Command_User_Guide.pdf

I found this on the documentation site but searching for command, but it only lists Command Guides for Adams View for each version.

https://nexus.hexagon.com/documentationcenter/en-US/bundle?cluster=true&exclude_metadata_filter.field=display-type&exclude_metadata_filter.value=inline&labelkey=prod-adams&q=command&rpp=10&sort.field=last_uploaded&sort.value=desc&fromSlug=adams

I'm going through an existing command file which includes acar and amech commands (so I have the same question for amech, but I understand this is a Car forum), and I'd like to review the command guide to understand all the options / arguments.

Thanks!

--Tim

Parents
  • 0

    Hi Tim,

    The basic commands are the same all over Adams (View, Car, Mechatronics, ...). And the command guide you linked to is exactly that. (This is also found directly in the online help in html-format).

    What you refer to as Adams Car commands is probably calls to Adams Car macros. (There are a lot of these). I don't think there is a complete guide for these.

    What you can do is to look at the Command Navigator and see the different options when bringing up the dialog boxes for each command.

    Most of the options should be self explanatory. If you need further explanations you would have to look at the online help for the specific element or functionality that the command is about.

    Hope this helps.

    //Henrik

Reply
  • 0

    Hi Tim,

    The basic commands are the same all over Adams (View, Car, Mechatronics, ...). And the command guide you linked to is exactly that. (This is also found directly in the online help in html-format).

    What you refer to as Adams Car commands is probably calls to Adams Car macros. (There are a lot of these). I don't think there is a complete guide for these.

    What you can do is to look at the Command Navigator and see the different options when bringing up the dialog boxes for each command.

    Most of the options should be self explanatory. If you need further explanations you would have to look at the online help for the specific element or functionality that the command is about.

    Hope this helps.

    //Henrik

Children
  • 0 in reply to Henrik.Skovbjerg

    Hi Henrik,

    Thanks for the info and the quick reply!  There are only a couple that I am looking at "acar toolkit adjust mass ..." and "amech template_builder control_system modify ..."  These are both self-explanatory as to their purpose and what the intent is for the specific arguments.  

    I was mostly asking to find out if there was another location i should be looking for references, but it sounds like that is not the case.

    Again - appreciate the reply and info!

    -- Tim

Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.