Stats

  • Replies 1
  • Subscribers 19
  • Views 271
  • Members are here 0

VNA Measurement Issue on VSS

KK202507285148

Hello, I was trying to get some measurements like OIP3, OP1dB and such as on VSS. I was using a ADL8142 and connected a VNA to it. I also specified the FSTART and FSTOP as 23/31 GHz and I have added the netlist to my AMP_F. But there is a problem.

1- When all the columns and values from the netlist are available (Freq(,MHz) Gain(,dB) NF(,dB) OP1dB(,dBm) OPSAT(,dBm) RISO(,dB) OIP3(,dBm) S11(mag,dB) S11(phs,deg) S22(mag,dB) S22(phs,deg) OIP2(,dBm)), the measurements for Gain, NF and etc. are wrong compared to the datasheet. Also, the netlist data are directly from their website so it shouldn't be a problem.

2- When I delete all the columns except Gain and NF (Freq(,MHz) Gain(,dB) NF(,dB)) and measure again, they become right.

3- When I add a single column of OP1dB (Freq(,MHz) Gain(,dB) NF(,dB) OP1dB(,dBm)), they become wrong again.


Is there an explanation for this which I am missing? I am new to AWR and especially VSS and it is important for my project. Thanks!

Parents

  • Is it possible for you to go to support.cadence.com and open a support ticket?

    This may be the best way for us to proceed, as the troubleshooting we are likely to do may require a more in-depth interchange, and possible exchange of project files or screenshots.

    I did go to Analog's site to try to download the data sheet you are working with, but I am already concerned that we may be looking at different documents and/or using the data sheet in a different way in the project.

Reply

  • Is it possible for you to go to support.cadence.com and open a support ticket?

    This may be the best way for us to proceed, as the troubleshooting we are likely to do may require a more in-depth interchange, and possible exchange of project files or screenshots.

    I did go to Analog's site to try to download the data sheet you are working with, but I am already concerned that we may be looking at different documents and/or using the data sheet in a different way in the project.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.