Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 13189
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

pin position problem

290702500

hi everyone

i encounter a problem

 when i abstract the stand cell lef and load into soc encounter, i find the yellow pin of the cell out of metal(the pin'metal). it can be DRC problem when do route.

someone can help me how the yellow pin position from?

thanks a lot!!

Parents

  • HI, BobD

    thanks first,

    but i donot know how to upload the screen shot.

    because i change the layout height of stand cell and move the cell origin down. and i find yellow pin out of metal has relationship with the metal1 pitch in the tech file.as i known "

    The cell height must be a multiple of the horizontal grid spacing; the cell width must be a multiple of the vertical grid spacing
    i  do as that,but the pin still out of metal.so what can i do? 
     thanks you again!!
Reply

  • HI, BobD

    thanks first,

    but i donot know how to upload the screen shot.

    because i change the layout height of stand cell and move the cell origin down. and i find yellow pin out of metal has relationship with the metal1 pitch in the tech file.as i known "

    The cell height must be a multiple of the horizontal grid spacing; the cell width must be a multiple of the vertical grid spacing
    i  do as that,but the pin still out of metal.so what can i do? 
     thanks you again!!
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.