Stats

  • Locked Locked
  • Replies 8
  • Subscribers 126
  • Views 18437
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to plot a graph?

leongec

hello all, i am a newbie for cadence

 I would like to plot a graph on the wavescan. Instead of getting the plot data  from simulation, i need to plot a graph with my own equation. For my understanding, i should load a .raw file into the graph window. My another problem is, how to generate .raw file?

 

Thank you for your advice!

Parents
  • Hi I want to plot the graph on the wavescan. Data for this graph is not from the simulation. 
    It is measurement data and had been save as .csv. I need this to compare with simulation result. I have tried two methods as suggested above:
    1. I open the .csv file in wavescan and the pop up error: document root element is missing". I've include the sample file as follows:

    ";X, Y"
    ";Re, Re"
    ";freq, S21"
    ";Hz, dB"
    1.50E+09,-4.15E+00
    1.51E+09,-4.17E+00
    1.51E+09,-4.17E+00
    1.52E+09,-4.10E+00
    1.52E+09,-3.94E+00
    1.53E+09,-3.82E+00
    1.53E+09,-3.79E+00
    1.54E+09,-3.88E+00
    1.54E+09,-4.01E+00

    2.I use getasciiwave command. There is a syntax error in input. for getasciiwave command I save the input file as .txt. 

    Can anyone help me solving the problem?
Reply
  • Hi I want to plot the graph on the wavescan. Data for this graph is not from the simulation. 
    It is measurement data and had been save as .csv. I need this to compare with simulation result. I have tried two methods as suggested above:
    1. I open the .csv file in wavescan and the pop up error: document root element is missing". I've include the sample file as follows:

    ";X, Y"
    ";Re, Re"
    ";freq, S21"
    ";Hz, dB"
    1.50E+09,-4.15E+00
    1.51E+09,-4.17E+00
    1.51E+09,-4.17E+00
    1.52E+09,-4.10E+00
    1.52E+09,-3.94E+00
    1.53E+09,-3.82E+00
    1.53E+09,-3.79E+00
    1.54E+09,-3.88E+00
    1.54E+09,-4.01E+00

    2.I use getasciiwave command. There is a syntax error in input. for getasciiwave command I save the input file as .txt. 

    Can anyone help me solving the problem?
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.