Stats

  • Locked Locked
  • Replies 36
  • Subscribers 130
  • Views 29722
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VerilogA Problem in MMSIM-7.1

gokce

Hi,

 I am having a problem to simulate my verilogA files under MMSIM 7.1. They work fine under MMSIM-6.0. In spectreout, I get:

ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB/3821_soi12so_Test_Tapeout_Sept09_BinarySearch_veriloga_veriloga.va.BinSearch.ahdlcmi/Linux2.6.11.4-21.9-smp+gcc/ for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL 0', and try again. If the reason for the failure was a syntax error, contact your Cadence Customer Support representative with the netlist, log files, behavioral model files, and any other information that can help identify the problem.

 In  ahdlcmi.out, I get:

/usr/cds/mmsim-7.1/tools.lnx86/systemc/gcc/4.1/bin/gcc  -march=i486 -ffast-math -O3 -DSYSV -DSVR4 -D_REENTRANT -fPIC   -DconfigSPECTRE -I. -I/usr/cds/mmsim-7.1/tools.lnx86/spectre/ahdlcmi/include -c BinSearch_DcFuncDerLoad.c -o obj/optimize/5.0/BinSearch_DcFuncDerLoad.o || rm -f -f obj/optimize/5.0/BinSearch_DcFuncDerLoad.o;
gcc: error trying to exec 'cc1': execvp: No such file or directory

I attached the log files. Does anyone have an idea?

 

Thanks,

Gokce

netlist.zip
Parents
  • TedO

    Thanks Andrew,  I realize MMSIM7.2 is somewhat dated ( we are running) 7.2 actually and not 7.1).  The odd thing is that

    I'm able to perform Spectre simulations with many of our other desiogn kits on CentOS7 without any problems : cmosp18, tsmc90nm/65nm.

    It is only with the IBM 130nm kit which I encounter that odd error.  If we can't figure it out (our system admins think it s path issue), I can try

    installing a newer verison of MMSIM.  Whic one do you recommend.  I'm running IC5.141 because our two highyl used kits (tsmc65nm/90nm)

    are qualified for use with IC5.141 are there are no other versions of this kit.

    Ted

Reply
  • TedO

    Thanks Andrew,  I realize MMSIM7.2 is somewhat dated ( we are running) 7.2 actually and not 7.1).  The odd thing is that

    I'm able to perform Spectre simulations with many of our other desiogn kits on CentOS7 without any problems : cmosp18, tsmc90nm/65nm.

    It is only with the IBM 130nm kit which I encounter that odd error.  If we can't figure it out (our system admins think it s path issue), I can try

    installing a newer verison of MMSIM.  Whic one do you recommend.  I'm running IC5.141 because our two highyl used kits (tsmc65nm/90nm)

    are qualified for use with IC5.141 are there are no other versions of this kit.

    Ted

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.