Stats

  • Locked Locked
  • Replies 6
  • Subscribers 125
  • Views 15069
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

error while running spectre using ic 5141

Bhavsh

I am getting the following error while running spectre..error is

 "*Error* Errors encountered during simulation.The simulator run log has not been generated.

    possible cause could be an invalid command line option for the version of the simulator you are running .Choose Setup -> Environment

    and verify that the command line options specified in the userCmdLineoption field are supported for the simulator.

A lternatively , run the simulator standalone using the runSimulation file in the netlist directory to know the exact cause of the error."

But i didnt give any word in  "userCmdLineoption" of analog design environment window (setup->environment).

how can i solve this? 

Parents

  • Indeed. From a quick experiment, the "feature file" (which is how ADE determines what features the simulator possesses, so that) for MMSIM7X is found even if the path is after IC5141 (because there is no "feature file" in IC5141). But the simulator would get picked up from IC5141 (as Andrew said).

    So it will think it has the features of MMSIM, but actually run the IC version of spectre.

    So all you should have to do is put the MMSIM path first.

    I guess this is really a bug, but since it's something that doesn't make any sense to do, it's very unlikely to get fixed (given where IC5141 is in its life cycle).

    Regards,

    Andrew.

Reply

  • Indeed. From a quick experiment, the "feature file" (which is how ADE determines what features the simulator possesses, so that) for MMSIM7X is found even if the path is after IC5141 (because there is no "feature file" in IC5141). But the simulator would get picked up from IC5141 (as Andrew said).

    So it will think it has the features of MMSIM, but actually run the IC version of spectre.

    So all you should have to do is put the MMSIM path first.

    I guess this is really a bug, but since it's something that doesn't make any sense to do, it's very unlikely to get fixed (given where IC5141 is in its life cycle).

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.