Stats

  • Locked Locked
  • Replies 1
  • Subscribers 125
  • Views 12740
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Noise Analysis

rishimnnit

 We are currently working on a circuit to tune the transconductor on cadence software (virtuoso).

We have designed the circuit but now we want to do the noise analysis for it.We are unable to do so.

Please help us with the noise analysis in CADENCE

thanks in advance......

  • "unable to do so" is not terribly descriptive of your problem. You'll need to give more information such as:

    1. Which simulator are you trying to use?
    2. How are you launching that simulation (via the Analog Design Environment, or standalone?)
    3. Did you try selecting "noise" as the analysis in ADE for the simulator you're using?
    4. If so, what was the problem?

    Before posting questions such as this (and you posted it under  Feedback, suggestions and questions which is not a particularly focussed place to post it), please think carefully if anyone is likely to be able to understand what your problem is.

    I'm assuming you're not after a basic "how do I simulate things in virtuoso" type answer - normally you'd have done some basic simulation first before starting noise analyses (to make sure the circuit works) - so I assume you're past that.

    Regards,

    Andrew.

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.