Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 31470
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PR Boundary

pitter

Hello,

When drawing layout from schematic, there is a PR Boundary option in the  'Generate All From Source' dialog box. It is depicted as a cyan field, that covers other layers. Placing a transistor (or ony other cell) on it makes it invisible (the PR boundary covers it). What is its purpose and what does the abbreviation 'PR' stand for? The PR Boundary cyan layer is not even present in LSW window, but there is a prBoundary layer of violet color.

Kind Regards,

pitter.

Parents

  • prBoundary stands for "Place and Route Boundary". It is intended to be the region within which placement is done, and where routing is constrained to.

    In IC61X, prBoundary is a special object - it's seen under the "objects" the LSW. The colours and fill patterns used to display it though are those associated with the prBoundary layer in the tech file - so you'd need to use the Display Resource Editor to see how the prBoundary layer is displayed (maybe "drawing" purpose or maybe "boundary" purpose). Any normal shapes on prBoundary are ignored by the tool.

    In IC5141, prBoundary was just a shape on a layer - and it may be "drawing" or "boundary" purpose (my guess is that's why you're seeing two different colours). It may be that the packet defined for it in your display.drf has been set with a fill pattern - normally it's left with no fill pattern. You can then use the set valid layers (in the LSW) to control whether these prBoundary layer-purpose pairs show up in the LSW, and you can use the Display Resource Manager to control the appearance.

    In both cases the boundary/shape object are important because they are used by the tools to guide various things.

    Regards,

    Andrew.

Reply

  • prBoundary stands for "Place and Route Boundary". It is intended to be the region within which placement is done, and where routing is constrained to.

    In IC61X, prBoundary is a special object - it's seen under the "objects" the LSW. The colours and fill patterns used to display it though are those associated with the prBoundary layer in the tech file - so you'd need to use the Display Resource Editor to see how the prBoundary layer is displayed (maybe "drawing" purpose or maybe "boundary" purpose). Any normal shapes on prBoundary are ignored by the tool.

    In IC5141, prBoundary was just a shape on a layer - and it may be "drawing" or "boundary" purpose (my guess is that's why you're seeing two different colours). It may be that the packet defined for it in your display.drf has been set with a fill pattern - normally it's left with no fill pattern. You can then use the set valid layers (in the LSW) to control whether these prBoundary layer-purpose pairs show up in the LSW, and you can use the Display Resource Manager to control the appearance.

    In both cases the boundary/shape object are important because they are used by the tools to guide various things.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.