Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 13917
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cadence ADE-XL: loading a previously saved ocean script

vivkr

Hi,

I wrote out an ocean script from my ADE-XL setup, and would like to load it to restore the states, specs etc. For some weird reason (nothing to do with Cadence but the design environment I have), the spec limits are not saved in the ADE-XL file. So I need to specify spec limits each time I open the ADE-XL view new.

When I write an ocean script, I can see that this info is there. So I thought I might be able to bypass the problem by writing and reading an ocean script. However, I only see an option for saving the ocean script, but none for reading it it.

Any tips?

Thanks,

Vivek

Parents

  • Hi Andrew,

    We did  discuss this once. I had posted about it earlier, but found out later that it has nothing to do with the Cadence tools themselves, but more with our internal design kit and file checkout system. The reason I think so is because I see this problem only with some ADE-XL setups and not all, and given the chaotic behavior of the internal design kit, it is only too likely that the problem comes from there. By the way, we've got IC6.1.3.500.14 here. 

    If there is no direct method of loading the saved OCEAN script, then I suppose my best chance lies in creating a new cellview with a new ADE-XL view, where I load in the tests from the old one, and try and see if the specs are saved there.

    Regards,

    Vivek

Reply

  • Hi Andrew,

    We did  discuss this once. I had posted about it earlier, but found out later that it has nothing to do with the Cadence tools themselves, but more with our internal design kit and file checkout system. The reason I think so is because I see this problem only with some ADE-XL setups and not all, and given the chaotic behavior of the internal design kit, it is only too likely that the problem comes from there. By the way, we've got IC6.1.3.500.14 here. 

    If there is no direct method of loading the saved OCEAN script, then I suppose my best chance lies in creating a new cellview with a new ADE-XL view, where I load in the tests from the old one, and try and see if the specs are saved there.

    Regards,

    Vivek

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.