Stats

  • Locked Locked
  • Replies 6
  • Subscribers 127
  • Views 15445
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

problem with mmsim61

minci

 i've just finished the installation of cadence ic5141 and mmsim61 and configuration.

 when i simulating a simple inverter circuit in ADE,it gives the error messages below:

 

cpp: unrecognized option `-$'
Environment variable:
    SPECTRE_DEFAULTS=-E
Command line:
    /usr/eda/cadence/MMSIM61/tools.lnx86/spectre/bin/32bit/spectre -env  \
        artist5.1.0 +escchars +log ../psf/spectre.out +inter=mpsc  \
        +mpssession=spectre0_30971_1 -format sst2 -raw ../psf  \
        -I/usr/eda/cadence/lib/IBM_PDK/cmrf8sf/V1.6.2.4DM/Spectre/models  \
        +lqtimeout 900 -maxw 5 -maxn 5 input.scs
spectre pid = 31131

Loading /usr/eda/cadence/MMSIM61/tools.lnx86/cmi/lib/4.0/libinfineon_sh.so ...
Loading /usr/eda/cadence/MMSIM61/tools.lnx86/cmi/lib/4.0/libnortel_sh.so ...
Loading /usr/eda/cadence/MMSIM61/tools.lnx86/cmi/lib/4.0/libphilips_sh.so ...

Internal error found in spectre.  Please run `getSpectreFiles' or send the netlist, the spectre log file, the behavioral model files, and any other information that can help identify the problem to support@cadence.com.
    Segmentation fault.

 

 then the ADE is stopping here,how can i solve these?

thx for help!

Parents
  • Andrew Beckett

    It's impossible to diagnose without more information. Maybe you should try taking your input.scs and running from the command line and see if it reveals more information about the root cause.

    Potentially there might be some sensitivity to what is in your input.scs, but without seeing that and knowing the precise version of spectre, it's hard to know. Even repeating this within Customer support could be a challenge as the version of spectre you're using is old and unsupported, as Tawna mentioned - but Customer support would do their best to help you (I'm advising that because you may not be able to post the netlist here, and certainly not the model files).

    Regards,

    Andrew.

Reply
  • Andrew Beckett

    It's impossible to diagnose without more information. Maybe you should try taking your input.scs and running from the command line and see if it reveals more information about the root cause.

    Potentially there might be some sensitivity to what is in your input.scs, but without seeing that and knowing the precise version of spectre, it's hard to know. Even repeating this within Customer support could be a challenge as the version of spectre you're using is old and unsupported, as Tawna mentioned - but Customer support would do their best to help you (I'm advising that because you may not be able to post the netlist here, and certainly not the model files).

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.