Stats

  • Locked Locked
  • Replies 6
  • Subscribers 126
  • Views 15225
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

problem with mmsim61

minci

 i've just finished the installation of cadence ic5141 and mmsim61 and configuration.

 when i simulating a simple inverter circuit in ADE,it gives the error messages below:

 

cpp: unrecognized option `-$'
Environment variable:
    SPECTRE_DEFAULTS=-E
Command line:
    /usr/eda/cadence/MMSIM61/tools.lnx86/spectre/bin/32bit/spectre -env  \
        artist5.1.0 +escchars +log ../psf/spectre.out +inter=mpsc  \
        +mpssession=spectre0_30971_1 -format sst2 -raw ../psf  \
        -I/usr/eda/cadence/lib/IBM_PDK/cmrf8sf/V1.6.2.4DM/Spectre/models  \
        +lqtimeout 900 -maxw 5 -maxn 5 input.scs
spectre pid = 31131

Loading /usr/eda/cadence/MMSIM61/tools.lnx86/cmi/lib/4.0/libinfineon_sh.so ...
Loading /usr/eda/cadence/MMSIM61/tools.lnx86/cmi/lib/4.0/libnortel_sh.so ...
Loading /usr/eda/cadence/MMSIM61/tools.lnx86/cmi/lib/4.0/libphilips_sh.so ...

Internal error found in spectre.  Please run `getSpectreFiles' or send the netlist, the spectre log file, the behavioral model files, and any other information that can help identify the problem to support@cadence.com.
    Segmentation fault.

 

 then the ADE is stopping here,how can i solve these?

thx for help!

Parents
  • Andrew Beckett

    That's line 180 of the spectre script, not line 180 of the input.scs (at least I hope so). All that says is that the script failed because the executable it launched failed.

    Doesn't tell us anything more. Sorry... A testcase would be needed, most likely (at least seeing the input.scs, as I said earlier).

    Regards,

    Andrew.

Reply
  • Andrew Beckett

    That's line 180 of the spectre script, not line 180 of the input.scs (at least I hope so). All that says is that the script failed because the executable it launched failed.

    Doesn't tell us anything more. Sorry... A testcase would be needed, most likely (at least seeing the input.scs, as I said earlier).

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.