Stats

  • Locked Locked
  • Replies 4
  • Subscribers 126
  • Views 16151
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

the sample library in dfII

minci

hi,there

i have added the rfLib library which located in $CDS/tools/dfII/samples/artist directory to the ic5141 usr6 through library manager.

 But when i add the balun_com instance to the schematic,and start the simulation in the ADE,it gives the error message as below:

ERROR: Netlister: unable to descend into any of the views defined in the view list: "spectre cmos_sch cmos.sch schematic veriloga ahdl" for instance I4 in cell test_pre.

Either add one of these views to: Library: rfLib Cell: balun_com or modify the view list to contain an existing view.

End netlisting Apr 10 16:10:18 2010

 

why does this occur?

BTW,where can i find the manuals about the libraries(i.e,rfLib,analogLib....) including in the ic5141? Coz there are many functions of instances i dont know about them.

Parents

  • Hi minci

    Does your balun_com cell has a "veriloga" view? What version of spectre are you using?

    terminal>spectre -W

    You can find out more about analogLib cells at $CDSHOME/doc/analoglibref/analoglibref.pdf

    You can also read the veriloga codes for the cells to understand how they work. In case you are not aware, the following 2 libraries are also quite useful:

    DEFINE ahdlLib $CDSHOME/tools/dfII/samples/artist/ahdlLib
    DEFINE bmslib $CDSHOME/tools/dfII/samples/artist/bmslib


    Best regards
    Quek

Reply

  • Hi minci

    Does your balun_com cell has a "veriloga" view? What version of spectre are you using?

    terminal>spectre -W

    You can find out more about analogLib cells at $CDSHOME/doc/analoglibref/analoglibref.pdf

    You can also read the veriloga codes for the cells to understand how they work. In case you are not aware, the following 2 libraries are also quite useful:

    DEFINE ahdlLib $CDSHOME/tools/dfII/samples/artist/ahdlLib
    DEFINE bmslib $CDSHOME/tools/dfII/samples/artist/bmslib


    Best regards
    Quek

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.