Stats

  • Locked Locked
  • Replies 5
  • Subscribers 126
  • Views 13763
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Using Custom SKILL functions with Monte Carlo in ADE and OCEAN

gwong

The workaround (#1) provided below did not work for me.

http://support.cadence.com/wps/myportal/cos/COSHome/viewsolution/!ut/p/c5/dY1BcoIwAEXPwgGYBIQkLBNASDOCUoqQDZNSS5FKKDI6eHrxAH1_-ebPAxKsG9Sta9Xc6UH9ghJIVFt25FvCgV7qJwRyghKRFSFcAcfXA9XwHygEFZD45W3bItCLtjmD3Bf8jeCNDQUCxaCny1rKQRk3GgeatgENDhwfCx7TgJlpGrnk_VzxyPl2lOU2sUBLZkq8aTSb5zwhZPKnSt6aqxNaoi8h07s7X9QoP354NTNx3o3u196sHzO2_5a7d0Ju22W06Ct1zUqH7e0w_jwYBkhifTmBsR8eW0KNJ4fccUU!/dl3/d3/L2dBISEvZ0FBIS9nQSEh/

Here's my error message

     ERROR (APS-8003): subckts: Error evaluating ocean expression `txpp_Q0=dataJitter(clip((VT("/I0/ICORE_Q0CP") -     VT("/I0/ICORE_Q0CN")) 1e-08 1.5e-08) (1 / 1.25e+10) 0)'.

Unsuccessfully evaluated export statements (based on return code).

Analysis `mc1' was terminated prematurely due to an error.

It works if I enter the expression in the CIW window.

I also tried using OCEAN by loading the SKILL routine in the monteCarlo.ocn script.  I get the error message too.

  Thanks in advance for your help.

 

Regards,

Gary

Parents

  • Hi Gary,

    I see this is being dealt with via SR  42066046. I've checked, and the workaround in the solution mentioned above does work - but best followed up via the SR (I've been talking with the AEs dealing with it).

    Loading the code in the monteCarlo.ocn script won't work, because the key thing is that spectre starts an "artil" process to do the calculations, and the artil process needs to have any custom code loaded.

    Regards,

    Andrew.

Reply

  • Hi Gary,

    I see this is being dealt with via SR  42066046. I've checked, and the workaround in the solution mentioned above does work - but best followed up via the SR (I've been talking with the AEs dealing with it).

    Loading the code in the monteCarlo.ocn script won't work, because the key thing is that spectre starts an "artil" process to do the calculations, and the artil process needs to have any custom code loaded.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.