Hello everyone~I just install MMSIM7.1 with IC5141_USR6 and try to simulation a simple circuit, but when I finish all settings go "netlist and run". It stopped at CIW and showed the following message"errors encountered during simulation. the simulator run log has not been generated. Possible cause could be an invalid command line option for the version of the simulator you are running. choose setup ->environment and verify that the command line option specified in the userCmdLineOption field are supported for the simulator. Alternatively run the simulator standalone using the runSimulation file in the netlist directory to know the exact cause of the error."
and then I run the runsimulation and get a message "/usr/cad/cadence/MMSIM/cur/tools.lnx86/spectre/bin/32bit/spectre: error while loading shared libraries: libelf.so.1: cannot open shared object file: No such file or directory"I don't know how to fix this problem. I probably made some mistakes at somewhere.Please give me some advise !!
# rpm -qa | grep elfutils
If elfutils is installed, add it to your library path, otherwise refer to this post: http://www.cadence.com/Community/forums/p/14360/24264.aspx#24264 (except search for the shared object you need)