Stats

  • Locked Locked
  • Replies 4
  • Subscribers 126
  • Views 14916
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

****ERROR****: Unmatched double quote for string:

Romay

when i simulating a simple inverter circuit in ADE .Initially, I used Spectre simulator and the simulations proceeded with no errors. However, it look a very long time. Then, I switched to Ultrasim simulator. While doing simulations with the same test-bench(as used while running Spectre simulations), I'm getting the following error:

Successful checkout of ULTRASIM license with total wait time of 0 sec.

Loading /usr/eda/cadence/mmsim61/tools.lnx86/cmi/lib/4.0/libinfineon_sh.so ...
Loading /usr/eda/cadence/mmsim61/tools.lnx86/cmi/lib/4.0/libnortel_sh.so ...
Loading /usr/eda/cadence/mmsim61/tools.lnx86/cmi/lib/4.0/libphilips_sh.so ...
Loading /usr/eda/cadence/mmsim61/tools.lnx86/cmi/lib/4.0/libsparam_sh.so ...
Loading /usr/eda/cadence/mmsim61/tools.lnx86/cmi/lib/4.0/libstmodels_sh.so ...

****ERROR****: Unmatched double quote for string: "

 

I  looked in the netlist for "" (double quotes) and didin't find .

Could you please help me in sorting-out this issue? 

Any help is appreciated.

Parents
  • Andrew Beckett
    Hi Romay,

    I found a couple of reports of a similar problem, in a similarly old version of Ultrasim. Back then (if my memory is correct) Ultrasim used its own front end (parser) and had not yet moved to the new common front end that spectre uses. In some complex cases it had trouble parsing the model files.

    The version you're using is old and no longer supported (it's over 4 years old). In the cases that were reported, the problem was resolved by moving to a newer version.
    Since there have been MMSIM62, MMSIM70, MMSIM71 and MMSIM72 as major releases since this version, I would suggest you move to the latest MMSIM72.

    Regards,

    Andrew.
Reply
  • Andrew Beckett
    Hi Romay,

    I found a couple of reports of a similar problem, in a similarly old version of Ultrasim. Back then (if my memory is correct) Ultrasim used its own front end (parser) and had not yet moved to the new common front end that spectre uses. In some complex cases it had trouble parsing the model files.

    The version you're using is old and no longer supported (it's over 4 years old). In the cases that were reported, the problem was resolved by moving to a newer version.
    Since there have been MMSIM62, MMSIM70, MMSIM71 and MMSIM72 as major releases since this version, I would suggest you move to the latest MMSIM72.

    Regards,

    Andrew.
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.