Stats

  • Locked Locked
  • Replies 4
  • Subscribers 125
  • Views 19155
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Export CDL netlist from two schematic view?

fqp1000y

Dear

    I have a lower level cell name CELL1, and it have two schematic view, one is schematic, another is schematic1;

   And I have a top level schematic name TOP, it instantion CELL1.

   Now i want to export two CDL netlist from TOP, one is NETLIST1, another is NETLIST2.

   The subckt CELL1 in NETLIST1 is generated from schematic, and NETLIST2 is generated from schematic1

   How i can do this?Thanks!

Parents

  • Several ways.

    If using IC614, on the File->Export->CDL you can alter the cdlSimViewList field, so you can add "schematic1" into the view list before "schematic".

    If using IC5141, you could put a line in your .simrc file (say in the working directory) saying:

    cdlSimViewList='("auCdl" "schematic1" "schematic")

    In either release, you could create a config (using File->New->CellView and using Hierarchy Editor as the tool) which can then define the rules by which the design is expanded - and you could either tell it to use view schematic1 for this cell, or for a specific instance. Then you'd netlist with the lib/cell/view being this config view you created.

    Regards,

    Andrew.

Reply

  • Several ways.

    If using IC614, on the File->Export->CDL you can alter the cdlSimViewList field, so you can add "schematic1" into the view list before "schematic".

    If using IC5141, you could put a line in your .simrc file (say in the working directory) saying:

    cdlSimViewList='("auCdl" "schematic1" "schematic")

    In either release, you could create a config (using File->New->CellView and using Hierarchy Editor as the tool) which can then define the rules by which the design is expanded - and you could either tell it to use view schematic1 for this cell, or for a specific instance. Then you'd netlist with the lib/cell/view being this config view you created.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.