When I try to run a Spectre dc and trans simulation with my 8-bit-adder circuit, have an internal error stopping the simulation. I get the following messages in the spectre log window:
1) the usual "unable to compile ahdlcmi module library" message (which has not stopped my simulations in the past),
2) a warning from spectre during initial setup about having PMOS and NMOS from the driver circuit running at 1 A/exceeding imelt = 10 mA (the test driver/load circuit provided by our course instructor)
3) "Internal error found in spectre during topology check, during initial setup." --> "Assertion failed in file 'topology.c' at line 1008"
Any ideas how to interpret error #3?? I've done the Virtuoso save and check with no error for the 8-bit-adder or any of the lower schematics in the hierarchy.
To explain how I'm implementing an 8-bit-adder: The design is four 2-bit-adders linked together. Each 2-bit-adder is made of 2 individual adders. Individual adders have Carry Out implemented with CMOS and Sum implemented with pass-logic transistor gates.
Thank you for your time.
Please find the following -
Setup Cadence IC 6.1.5_HF132 Setup Cadence Assura 4.1.2_HF20 for IC 6.1.5_HF132 Setup Cadence PVE 11.12_HF106 for IC 6.1.5_HF132 Setup Cadence MMSIM 11.10_HF509 for IC_6.1.5 HF132 Setup Cadence INCISIV 12.1_HF005 Setup Cadence CONFIRM 11.10
Thank you very very much