Stats

  • Locked Locked
  • Replies 25
  • Subscribers 128
  • Views 30498
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ADE XL Monte Carlo analysis: statistical results are not available

Mike Tian

 Hi all,

     I'm new to ADE XL and I encountered a problem when running  Monte Carlo "Mismatch" only analysis (using IC61 and mmsim07.2). At the end of the simulation it always gives this error: Statistical results for Monte Carlo simulation are not available for the test. I checked the sim log file, it shows the simulation had no error, but it seems like for some reason the results are just not available.The "Detail" field in "Show Mismatch" window shows only "N.A.".

     Could this be due to some set up issue in ADE XL or the PDK model (IBM) i am using? I did go through IBM's reference, and their subckts do have mismatch models, I also have set the global switches in .scs file to enable mismatch.

     Can anyone help me on this? Thank you very much!

 

Mike

    

Parents

  •  I also have a similar problem.

    I am using Cadence 6.1.4.64b.500.12 with the newest X-Fab 0.35µ XA035 PDK and whenever I try to start a Monte Carlo analysis ind ADE XL of a custom IC contructed with this technology I get the error message:

    ADEXL-5052: Monte Carlo run stopped because no statistical data generated for the test

    I followed the step for step guide provided in the Cadence help but still could not get the analysis to run.

    Is there any solution or tutorial yet to get the Monte Carlo analysis to run succesfully?

Reply

  •  I also have a similar problem.

    I am using Cadence 6.1.4.64b.500.12 with the newest X-Fab 0.35µ XA035 PDK and whenever I try to start a Monte Carlo analysis ind ADE XL of a custom IC contructed with this technology I get the error message:

    ADEXL-5052: Monte Carlo run stopped because no statistical data generated for the test

    I followed the step for step guide provided in the Cadence help but still could not get the analysis to run.

    Is there any solution or tutorial yet to get the Monte Carlo analysis to run succesfully?

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.