Stats

  • Locked Locked
  • Replies 4
  • Subscribers 125
  • Views 13787
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help me to interpret the waveform window.

Muffassir

 Hi all ,

Here is the attached image ..
[url=http://images.elektroda.net/30_1323332090.jpg][img]images.elektroda.net/.../url]

I want to know two things...

1)What i want to know is the interpretation in words of the Oval mark in the image.
Like :this is the signal at the value of this...is there any variable..

2)On x-axis the signal which we sweeep in the dc analysis form appears and the output is on the Y axis.The signal which i am sweeping in the Parametric analysis is the signal whose waveform gets drawn...Is this always the case..Correct my above statement if its wrong...Or it all depends on the signals which i choose to be plotted in the outputs(ADE L)

 

Parents

  • Thanks Andrew Sir,

     It had surely help me ..but i donno know what is legend where to see it...

    Futher what u interpret the image i have attched in earlier post (See above).Has the calculator have been used to plot these waveforms? am i correct. If Yes then how can i do that...i am newbie in cadence. I am using cadence 6.1.4.500 and ADE L/XL . 

    When i am trying to plot the same waveforms with the same ckt used (all from IEEE paper) .I am doing the parametric analysis and i am not getting the same waveform..Instead i am getting the same line for Iin2 sweeeps.I mean for all sweeps i am getting the same line..

     

Reply

  • Thanks Andrew Sir,

     It had surely help me ..but i donno know what is legend where to see it...

    Futher what u interpret the image i have attched in earlier post (See above).Has the calculator have been used to plot these waveforms? am i correct. If Yes then how can i do that...i am newbie in cadence. I am using cadence 6.1.4.500 and ADE L/XL . 

    When i am trying to plot the same waveforms with the same ckt used (all from IEEE paper) .I am doing the parametric analysis and i am not getting the same waveform..Instead i am getting the same line for Iin2 sweeeps.I mean for all sweeps i am getting the same line..

     

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.