Stats

  • Locked Locked
  • Replies 5
  • Subscribers 125
  • Views 15658
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to set CDF to let both .subckt and .model work?

YG screen name

Hi,

    I will create a mos pcell. There are two kinds of simulation model for the mos, one is subcircuit type(.subckt), the other is model type(.model). I want to know how to set CDF parameters for the mos cell in order to make the hspiceD simulator run correctly under both types.

    I know that the simulator parameter namePrefix is "X" for subcircuit type, and "M" for the model type. They are different. If I create only one cell, its parameter namePrefix is either "X" or "M". So I have to create two cells to adapt two types.  When I change the model type from one to the other, I have to modify the mos cell name in the schematic. If the amount of mos is large, it will not be a good idea.

   Is there any way supporting the two types of model to create only one cell to simulate the mos?

Parents
  • YG screen name

    Hi Andrew,

        Thanks for your reply. All of above have been solved.

        Another question about trigger function is whether I can set my own function as a trigger function before any window menu trigger function. For example, I want to add a function before ADE "RUN" trigger function.

Reply
  • YG screen name

    Hi Andrew,

        Thanks for your reply. All of above have been solved.

        Another question about trigger function is whether I can set my own function as a trigger function before any window menu trigger function. For example, I want to add a function before ADE "RUN" trigger function.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.