"capgen" error in Assura QRC (RCX)

Hi all,

I work with the technology of IBM CMOS7RF on Cadence 5.1 (IC5141). Currently I am trying to extract parameters for a self-customized inductor.  By setting "ind" model in schemetic as a blackbox and ignoring mismatches, I go through LVS. Now an error happens in QRC as below.

========================================================================= 

*WARNING* at "capgen": x-tile size is not floating point number

*ERROR* at "capgen": capgen job quit due to process file errors.

quitting.

 -blocking coupled5_shield1:0.02,M1,M2,M3,M4,M5 -blocking coupled5_shield2:0.02,M2,M3,M4,M5 -blocking coupled5_shield3:0.02,M3,M4,M5 -blocking coupled5_shield4:0.02,M4,M5 -blocking coupled4_shield1:0.02,M1,M2,M3,M4 -blocking coupled4_shield2:0.02,M2,M3,M4 -blocking coupled4_shield3:0.02,M3,M4 -blocking coupled3_shield1:0.02,M1,M2,M3 -blocking coupled3_shield2:0.02,M2,M3 -blocking coupled2_shield1:0.02,M1,M2 -blocking singleEndA_shieldT:0.02,MT,ML -blocking singleEndA_shield5:0.02,M5,MT,ML -blocking singleEndA_shield4:0.02,M4,M5,MT,ML -blocking singleEndA_shield3:0.02,M3,M4,M5,MT,ML -blocking singleEndA_shield2:0.02,M2,M3,M4,M5,MT,ML -blocking singleEndA_shield1:0.02,M1,M2,M3,M4,M5,MT,ML -res_blocking singleEndA_shieldT:0.02,ml -res_blocking singleEndA_shield5:0.02,ml -res_blocking singleEndA_shield4:0.02,ml -res_blocking singleEndA_shield3:0.02,ml -res_blocking singleEndA_shield2:0.02,ml -res_blocking singleEndA_shield1:0.02,ml -blocking singleEndT_shield1:0.02,M1,M2,M3,M4,M5,MT -blocking singleEndT_shield2:0.02,M2,M3,M4,M5,MT -blocking singleEndT_shield3:0.02,M3,M4,M5,MT -blocking singleEndT_shield4:0.02,M4,M5,MT -blocking singleEndT_shield5:0.02,M5,MT -blocking singleEnd5_shield1:0.02,M1,M2,M3,M4,M5 -blocking singleEnd5_shield2:0.02,M2,M3,M4,M5 -blocking singleEnd5_shield3:0.02,M3,M4,M5 -blocking singleEnd5_shield4:0.02,M4,M5 -blocking singleEnd4_shield1:0.02,M1,M2,M3,M4 -blocking singleEnd4_shield2:0.02,M2,M3,M4 -blocking singleEnd4_shield3:0.02,M3,M4 -blocking singleEnd3_shield1:0.02,M1,M2,M3 -blocking singleEnd3_shield2:0.02,M2,M3 -blocking singleEnd2_shield1:0.02,M1,M2 -blocking ml_transmission,sti,ML -blocking symind3_mlml_m1,sti,M1,MT,ML -blocking symind2_mlml_m1,sti,M1,MT,ML -blocking ind2_mtml_m1,sti,M1,MT,ML -res_blocking symind3_mlml_m1,mt_resistive,ml -res_blocking symind2_mlml_m1,mt_resistive,ml -res_blocking ind2_mtml_m1,mt_resistive,ml -blocking symind3_mlml_bb,sti,MT,ML -blocking symind2_mlml_bb,sti,MT,ML -blocking ind2_mtml_bb,sti,MT,ML -res_blocking symind3_mlml_bb,mt_resistive,ml -res_blocking symind2_mlml_bb,mt_resistive,ml -res_blocking ind2_mtml_bb,mt_resistive,ml -blocking bondPad_PC:5.28,sti,PC,ML -res_blocking bondPad_PC:5.28,ml -blocking bondPad_BB:5.28,sti,ML -res_blocking bondPad_BB,ml /home/zheng072/zy_senser/inductor_test1

*WARNING* Bad return status from RCX script generator. 0x100

===============================================================================

I cannot figure out what's wrong with "process file". I have installed Assura QRC package exactly as the document states. Any advices are appreciated.

Thanks.