Stats

  • Locked Locked
  • Replies 5
  • Subscribers 125
  • Views 16211
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Simulation Progress, IC6.14, MMSIM10

Kabal

 I cant find howis it possible to see a simulation progress while its running in ADE XL(GXL)? On the lower left corner i see the running -0/1 complete, but i want to see the % of completion. Is there any way i can do that?

Parents
  • Andrew Beckett

    Since there are potentially many simulations being run in ADE XL (e.g. corners, sweeps etc), showing the percentage of completion of a single simulation isn't terribly helpful. You can do Right Mouse->Output log in the results pane - over one of the specific runs (e.g. the Nominal run, or one of the corners - for the specific test in question). That allows you to see the simulation log and see what's happening for that particular run.

    Andrew

Reply
  • Andrew Beckett

    Since there are potentially many simulations being run in ADE XL (e.g. corners, sweeps etc), showing the percentage of completion of a single simulation isn't terribly helpful. You can do Right Mouse->Output log in the results pane - over one of the specific runs (e.g. the Nominal run, or one of the corners - for the specific test in question). That allows you to see the simulation log and see what's happening for that particular run.

    Andrew

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.