Stats

  • Locked Locked
  • Replies 8
  • Subscribers 125
  • Views 17812
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

spectre : plotting device parameters

swdesigner

I've used a flavor of SPICE in the past that let you plot (save the waveform for plotting with a viewer) MOSFET parameters such as VGST and GM, etc.

Has anyone had success with doing this in spectre? That SPICE manual I used also specified what MOSFET parameters were available for output.

I tried 

save xlx5.MN9.MN:IDS

and 

save xlx5.MN9:* 

and

save xlx5.MN9.MN:*

Hope for my results browser to show me all the parameters that a print OP info for the device showed. No luck.

My ultimate goal is to extract the true channel current of a MOSFET in a transient simulation. If I use the terminal currents, then those include the currents due to CGS and CGD and can be misleading.

Thanks!

Parents Reply Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.