Stats

  • Locked Locked
  • Replies 6
  • Subscribers 127
  • Views 3650
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Calibre(cal_2011.4_35.27) compatible with IC615?

Xiongliang

Dear Folks,

 

   We installed the Calibre (x86_cal_2011.4_35.27) on both 32-bit and 64-bit Linux machines with IC615 (IC-6.1.5-hf510). But it does not seem working properly. The calibre interface can be opened, but the DRC and RVE can not be run and showed the following errors:

 

 *Error* fprintf/sprintf: format spec. incompatible with data - "Format is '%s -hierDepth %s', argument #2 is 20"
<<< Stack Trace >>>
_sprintf("%s -hierDepth %s" strm_cmd (streamOutKeys->hierDepth))
(strm_cmd = _sprintf("%s -hierDepth %s" strm_cmd (streamOutKeys->hierDepth)))
sprintf(strm_cmd "%s -hierDepth %s" strm_cmd (streamOutKeys->hierDepth))
when(((streamOutKeys->

hierDepth) && ((streamOutKeys->hierDepth) != "")) sprintf(strm_cmd "%s -hierDepth %s" strm_cmd (streamOutKeys->hierDepth)))
let((strm_cmd tf) sprintf(nil "%L%L%L%L" libName cellName viewName ... ) (strm_cmd = strcat("strmout -library '" (streamOutKeys->libName) "'" " -strmFile " (streamOutKeys->outFile) ... )) unless(((streamOutKeys->cellMapTable) == "") (strm_cmd = strcat(strm_cmd " -cellMap " &))) unless(((streamOutKeys->layerTable) == "") (strm_cmd = strcat(strm_cmd " -layerMap " &))) ... )
mgc_rve_export_get_oastream_cmd(libName cellName viewName fileName)
(cmd = mgc_rve_export_get_oastream_cmd(libName cellName viewName fileName))

 

   Has anyone met the same problem?

 

Regards,

Parents

  •  Hello, Andrew,

         I am installing Caliber 2011 versions (ixl_cal_2011.4_35.27 for 64bit linux and x86_cal_2011.4_35.27 for 32bit linux) on Cadence IC615 with IBM-0.13um CMRF8SF design kit.
     

          In Cadence virtuoso IC layout menu, I can successfully pop up the Caliber interface with Runsets, but when push the DRC buttom, it seems that Cadence can not export the layout cellview to Calibre and gives the above errors. I choose the "GDSII" format in the input file menu in Calibre.

          

         I will also ask the question in Mentor forum.

     

    Thank you.

Reply

  •  Hello, Andrew,

         I am installing Caliber 2011 versions (ixl_cal_2011.4_35.27 for 64bit linux and x86_cal_2011.4_35.27 for 32bit linux) on Cadence IC615 with IBM-0.13um CMRF8SF design kit.
     

          In Cadence virtuoso IC layout menu, I can successfully pop up the Caliber interface with Runsets, but when push the DRC buttom, it seems that Cadence can not export the layout cellview to Calibre and gives the above errors. I choose the "GDSII" format in the input file menu in Calibre.

          

         I will also ask the question in Mentor forum.

     

    Thank you.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.