Stats

  • Locked Locked
  • Replies 6
  • Subscribers 127
  • Views 3650
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Calibre(cal_2011.4_35.27) compatible with IC615?

Xiongliang

Dear Folks,

 

   We installed the Calibre (x86_cal_2011.4_35.27) on both 32-bit and 64-bit Linux machines with IC615 (IC-6.1.5-hf510). But it does not seem working properly. The calibre interface can be opened, but the DRC and RVE can not be run and showed the following errors:

 

 *Error* fprintf/sprintf: format spec. incompatible with data - "Format is '%s -hierDepth %s', argument #2 is 20"
<<< Stack Trace >>>
_sprintf("%s -hierDepth %s" strm_cmd (streamOutKeys->hierDepth))
(strm_cmd = _sprintf("%s -hierDepth %s" strm_cmd (streamOutKeys->hierDepth)))
sprintf(strm_cmd "%s -hierDepth %s" strm_cmd (streamOutKeys->hierDepth))
when(((streamOutKeys->

hierDepth) && ((streamOutKeys->hierDepth) != "")) sprintf(strm_cmd "%s -hierDepth %s" strm_cmd (streamOutKeys->hierDepth)))
let((strm_cmd tf) sprintf(nil "%L%L%L%L" libName cellName viewName ... ) (strm_cmd = strcat("strmout -library '" (streamOutKeys->libName) "'" " -strmFile " (streamOutKeys->outFile) ... )) unless(((streamOutKeys->cellMapTable) == "") (strm_cmd = strcat(strm_cmd " -cellMap " &))) unless(((streamOutKeys->layerTable) == "") (strm_cmd = strcat(strm_cmd " -layerMap " &))) ... )
mgc_rve_export_get_oastream_cmd(libName cellName viewName fileName)
(cmd = mgc_rve_export_get_oastream_cmd(libName cellName viewName fileName))

 

   Has anyone met the same problem?

 

Regards,

Parents

  •  Hello, Derek,

        Could you be more specific about the setting of the enviroment variables. In my script, I only have two enviroment variables to setup the Calibre: 

          $MENTORHOME points to the mentor home directory

          $MGC_HOME points to the specific version of Calibre

        When $MGC_HOME points to 2010 versions of Calibre, e.g. ixl_cal_2010.4_26.16, IC615 can properly pops up the Calibre interface and do the DRC check, but when $MGC_HOME points to 2011 versions of Calibre, e.g. ixl_cal_2011.4_35.27, IC615 can still pops up the Calibre interface but DRC check can not be streamed out anymore.

         Could you please explain?

     

Reply

  •  Hello, Derek,

        Could you be more specific about the setting of the enviroment variables. In my script, I only have two enviroment variables to setup the Calibre: 

          $MENTORHOME points to the mentor home directory

          $MGC_HOME points to the specific version of Calibre

        When $MGC_HOME points to 2010 versions of Calibre, e.g. ixl_cal_2010.4_26.16, IC615 can properly pops up the Calibre interface and do the DRC check, but when $MGC_HOME points to 2011 versions of Calibre, e.g. ixl_cal_2011.4_35.27, IC615 can still pops up the Calibre interface but DRC check can not be streamed out anymore.

         Could you please explain?

     

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.