Stats

  • Locked Locked
  • Replies 1
  • Subscribers 125
  • Views 14002
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

out-of-context probing

BradW

We're having problems saving a netlist during post-layout simulation.   For this simulation we are using a config view that is pointed to an extracted view.  In ADE, when we try and save a net by selecting it on the schematic we are seeing

 INFO: (PARA-306) Simulation out-of-context probing cannot map the schematic net: A specified by net name. This could be because the schematic net is hierarchical and has no valid extracted equivalent, the extracted view is incomplete, or LVS has failed.

This is the first time I've had ADE complain when just trying to select a net to save (pre or post layout).   Is there some sort of cross-reference file we are missing?  When we look at the netlist created by the extracted view there are references to this node.

 Thanks 

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.