Stats

  • Locked Locked
  • Replies 6
  • Subscribers 125
  • Views 15532
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wavescan trace display issue

sohaiba

Hello,

I am facing a problem during plot of each output on wavescan. The wavescan should automatically assign colours to each trace(to differentiate between traces), but actually the traces are always plotted as white in colour. After which I have to assign colour manually by right clicking on trace properties and assign a colour (which works but if I replace the plots, the traces return to white colour which are really confusing for multiple traces).I am using IC6.1.5.72. Is this a software issue or related to the hardware?

Regards

Sohaib

Parents

  •  Yes sorry my fault. It is VIVA. Okay I will install the recent hotfixes. Another question, it is off-topic but as the issues of hotfixes came up, when is Cadence IC 6.1.5 expected to operate on RHEL6? As most of the latest PC systems are not fully compatible with RHEL5, so it gives a lot of driver etc issues as well.

    Regards

Reply

  •  Yes sorry my fault. It is VIVA. Okay I will install the recent hotfixes. Another question, it is off-topic but as the issues of hotfixes came up, when is Cadence IC 6.1.5 expected to operate on RHEL6? As most of the latest PC systems are not fully compatible with RHEL5, so it gives a lot of driver etc issues as well.

    Regards

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.