Stats

  • Locked Locked
  • Replies 6
  • Subscribers 127
  • Views 17911
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Assura LVS fail

Campo85

Hi everyone,

I have a problem to run Assura LVS in virtuoso. When I run the LVS, after a while, an alert box advise me that Assura fail. I attach the log file.

Thanks in advice for any reply

Stefano. 

Parents

  • Hi

    Quek Thanks for the reply, I've tryed to do how you said, but Assura still failed. The problem is that I'm sure about the layout. I have already done the LVS of the same layout on a different PC and it was correct. When Assura LVS fails, it open some windows for the debug of the layout, in my case anything happens. I begin to think that the problem is the installation of the tecnology file. In the log file there is something like this :

     

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'pnp_s_mis(BJT)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_18(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_25(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_25od33(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_25ud18(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_33(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_esd(DIO)' is not found. This binding will be skipped. 

     

    Could it be the problem ?

Reply

  • Hi

    Quek Thanks for the reply, I've tryed to do how you said, but Assura still failed. The problem is that I'm sure about the layout. I have already done the LVS of the same layout on a different PC and it was correct. When Assura LVS fails, it open some windows for the debug of the layout, in my case anything happens. I begin to think that the problem is the installation of the tecnology file. In the log file there is something like this :

     

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'pnp_s_mis(BJT)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_18(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_25(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_25od33(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_25ud18(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_33(DIO)' is not found. This binding will be skipped.

    WARNING (AVLVSNN-10040) : bindingFile/bind rule - schematic cell 'ndio_esd(DIO)' is not found. This binding will be skipped. 

     

    Could it be the problem ?

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.