Stats

  • Locked Locked
  • Replies 1
  • Subscribers 126
  • Views 13614
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Modeling third party devices in Simulation

bnugent

Hello,

 

I am using Cadence Virtuoso IC6.1.4. I am trying to use a model from a third party discrete in simulation and not having a lot of luck. I would like to know how to link a model file i.e.:

 

.MODEL  MODELABC123 D

+ IS=1.5213e-7

+ RS=0.05230

+ IKF=1.0287e-1

+ N=1.0

+ ISR=9.5e-10

+ CJO=1.2e-10

+ VJ=0.68 

+ M=0.36        

+ FC=0.5

+ BV=40.4

+ IBV=1.0e-4

+ EG=0.72

 to a symbol such that it simulates using spectre. I have found many how to's online but without a complete step by step description. A step by step on how to do link a model file (spice) to a symbol in cadence would be extremely helpful. Thanks in advance.

 

-Brian 

 

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.