Stats

Locked Locked
Replies 3
Subscribers 126
Views 6272
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ADE XL doesn't work. ERROR (ADEXL-5025)

Hello everyone,

I am using Cadence IC6.1.5-64b.500.9 (64-bit addresses) for my design.

The simulation with ADE L works well. I want to use ADE XL to do monte carlo simulation so, it doens't work. I tried a single run with ADE XL, it doesn't work also and it gives this message's error.

ERROR (ADEXL-5025): Preparation to run the simulation is failed for the run Interactive.24, point 1, test

Error while preparing to run the simulation.
Cannot copy "netlist into run netlist" from "/home/xxx/simulation/TEST/emeteur_commun/adexl/results/data/Interactive.24/1/TEST:emeteur_commun:1/netlist" to "/home/xxx/simulation/TEST/emeteur_commun/adexl/results/data/Interactive.24/psf/TEST:emeteur_commun:1/netlist", cpDataDir call returned 0

For details open log: /home/xxx/Qubic4X_wrk/logs_xxx/Job8.log for the point: (0 1)

did someone met this problem ?

Thank you for your help.

Abdel

Parents

Matrixesque over 12 years ago

I also seem to have this problem, and the log file is no help.

ERROR (ADEXL-5025): Preparation to run the simulation is failed for the run Interactive.1, point 1, test RNG:default_ell_filter:1, received error:
Error:
------------------------------
Error while preparing to run the simulation.
Cannot copy "netlist into run netlist" from "/root/simulation/RNG/default_ell_filter/default_ell_view/results/data/Interactive.1/1/RNG:default_ell_filter:1/netlist" to "/root/simulation/RNG/default_ell_filter/default_ell_view/results/data/Interactive.1/psf/RNG:default_ell_filter:1/netlist", cpDataDir call returned 0
For details open log: /home/rguerra/logs_root/Job2.log for the point: (1 1)
------------------------------

For more details, consult the job log file:
/home/rguerra/logs_root/Job2.log

However, when I go and take a look at the log, there is no helpful information there. Perhaps this error number means something to someone somewhere. I would normally associate a return value of 0 to be a good sign, but it seems that isn't the case here. Virtuoso is run as root with root permissions.

\o Netlisting Statistics:
\o Number of components: 4
\o
\o Elapsed time: 0.0s
\o Errors: 0 Warnings: 0
\o ...successful.
\o compose simulator input file...
\o ...successful.
\e *Error* Error during netlisting of design for the point ID (1 1).
\e ("error" 1 t nil ("*Error* Cannot copy \"netlist into run netlist\" from \"/root/simulation/RNG/default_ell_filter/default_ell_view/results/data/Interactive.1/1/RNG:default_ell_filter:1/netlist\" to \"/root/simulation/RNG/default_ell_filter/default_ell_view/results/data/Interactive.1/psf/RNG:default_ell_filter:1/netlist\", cpDataDir call returned 0"))
\e
\e
\o
\o *Error* Error ID = 5025
\o *Error* Error Msg = Error while preparing to run the simulation.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Matrixesque over 12 years ago

I also seem to have this problem, and the log file is no help.

ERROR (ADEXL-5025): Preparation to run the simulation is failed for the run Interactive.1, point 1, test RNG:default_ell_filter:1, received error:
Error:
------------------------------
Error while preparing to run the simulation.
Cannot copy "netlist into run netlist" from "/root/simulation/RNG/default_ell_filter/default_ell_view/results/data/Interactive.1/1/RNG:default_ell_filter:1/netlist" to "/root/simulation/RNG/default_ell_filter/default_ell_view/results/data/Interactive.1/psf/RNG:default_ell_filter:1/netlist", cpDataDir call returned 0
For details open log: /home/rguerra/logs_root/Job2.log for the point: (1 1)
------------------------------

For more details, consult the job log file:
/home/rguerra/logs_root/Job2.log

However, when I go and take a look at the log, there is no helpful information there. Perhaps this error number means something to someone somewhere. I would normally associate a return value of 0 to be a good sign, but it seems that isn't the case here. Virtuoso is run as root with root permissions.

\o Netlisting Statistics:
\o Number of components: 4
\o
\o Elapsed time: 0.0s
\o Errors: 0 Warnings: 0
\o ...successful.
\o compose simulator input file...
\o ...successful.
\e *Error* Error during netlisting of design for the point ID (1 1).
\e ("error" 1 t nil ("*Error* Cannot copy \"netlist into run netlist\" from \"/root/simulation/RNG/default_ell_filter/default_ell_view/results/data/Interactive.1/1/RNG:default_ell_filter:1/netlist\" to \"/root/simulation/RNG/default_ell_filter/default_ell_view/results/data/Interactive.1/psf/RNG:default_ell_filter:1/netlist\", cpDataDir call returned 0"))
\e
\e
\o
\o *Error* Error ID = 5025
\o *Error* Error Msg = Error while preparing to run the simulation.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.