Stats

  • Locked Locked
  • Replies 14
  • Subscribers 127
  • Views 19518
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Extracted simulation ERROR (SFE-23): "input.scs" 17: c1 is an instance of an undefined model cmodel.

bjbit

Hi,

I am working on IC614 with the techonology IBM7RF. After extracting models from layout by Assura QRC, I tried to do the post-simulation with that extraction. However, a long list of errors (SFE-23) come out in ADE with Spectre simulator. I couldn't find "input.scs" in the model folder of the technology. Could anyone help to locate this file? Or other ideas to fix this error? Thanks in advance.

Best regards, 

Parents

  • I don't know what you're doing - the above example was specifically trying to solve a problem with QRC extraction - if you don't know where the QRC extraction form is, you're presumably not using QRC?

    If your error is actually the recursive file include (which above was due to the person incorrectly trying to solve their original QRC issue), then it's because you have an include statement in spectre which is pointing back on itself. So please give the exact error message and also look at the top of the input.scs (the netlist you see in ADE when you do Simulation->Netlist->Display) and post any include statements here. That might help get to the bottom of what you've done wrong.

    Kind Regards,

    Andrew.

Reply

  • I don't know what you're doing - the above example was specifically trying to solve a problem with QRC extraction - if you don't know where the QRC extraction form is, you're presumably not using QRC?

    If your error is actually the recursive file include (which above was due to the person incorrectly trying to solve their original QRC issue), then it's because you have an include statement in spectre which is pointing back on itself. So please give the exact error message and also look at the top of the input.scs (the netlist you see in ADE when you do Simulation->Netlist->Display) and post any include statements here. That might help get to the bottom of what you've done wrong.

    Kind Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.