Stats

Locked Locked
Replies 3
Subscribers 125
Views 14899
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Warning : (CMI-2826)

reddy1553 over 12 years ago

Hi,

While I am running a simple resistor divider network through ADE, it is not working correctly.

I am gettting the following warning :

"WARNING (CMI-2826): R0_4__dmy0.rmain : No model and instance parameter is given."

"WARNING (CMI-2826): R0_4__dmy0.rend : No model and instance parameter is given."

Please help me on this.............

Regards

Deepak

Parents

reddy1553 over 12 years ago

I set $CDS_Netlisting_Mode set to Analog.... and restarted
But it is still showing the same problem...
Netlist :
// Cell name: test_r
// View name: schematic
//Series configuration of R1
R1_1__dmy0 (net2 R1_1__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R1_2__dmy0 (R1_1__dmy0 R1_2__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R1_3__dmy0 (R1_2__dmy0 R1_3__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R1_4__dmy0 (R1_3__dmy0 net4 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
//End of R1
//Series configuration of R0
R0_1__dmy0 (net4 R0_1__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R0_2__dmy0 (R0_1__dmy0 R0_2__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R0_3__dmy0 (R0_2__dmy0 R0_3__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R0_4__dmy0 (R0_3__dmy0 0 ) rppolywo l=10u w=2u m=1 mf=(1) mismatchflag=0
//End of R0
Log file Warnings :
Warning from spectre during initial setup.
    WARNING (CMI-2826): R0_4__dmy0.rmain: No model and instance parameter is given.
    WARNING (CMI-2826): R0_4__dmy0.rend: No model and instance parameter is given.
    WARNING (CMI-2826): R0_3__dmy0.rmain: No model and instance parameter is given.
    WARNING (CMI-2826): R0_3__dmy0.rend: No model and instance parameter is given.
    WARNING (CMI-2826): R0_2__dmy0.rmain: No model and instance parameter is given.
        Further occurrences of this warning will be suppressed.
Notice from spectre during topology check.
    No DC path from node `R1_1__dmy0' to ground, Gmin installed to provide path.
    No DC path from node `R1_2__dmy0' to ground, Gmin installed to provide path.
    No DC path from node `R1_3__dmy0' to ground, Gmin installed to provide path.
    No DC path from node `net4' to ground, Gmin installed to provide path.
    No DC path from node `R0_1__dmy0' to ground, Gmin installed to provide path.
        Further occurrences of this notice will be suppressed.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

reddy1553 over 12 years ago

I set $CDS_Netlisting_Mode set to Analog.... and restarted
But it is still showing the same problem...
Netlist :
// Cell name: test_r
// View name: schematic
//Series configuration of R1
R1_1__dmy0 (net2 R1_1__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R1_2__dmy0 (R1_1__dmy0 R1_2__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R1_3__dmy0 (R1_2__dmy0 R1_3__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R1_4__dmy0 (R1_3__dmy0 net4 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
//End of R1
//Series configuration of R0
R0_1__dmy0 (net4 R0_1__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R0_2__dmy0 (R0_1__dmy0 R0_2__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R0_3__dmy0 (R0_2__dmy0 R0_3__dmy0 ) rppolywo l=10u w=2u m=1 mf=(1) \
        mismatchflag=0
R0_4__dmy0 (R0_3__dmy0 0 ) rppolywo l=10u w=2u m=1 mf=(1) mismatchflag=0
//End of R0
Log file Warnings :
Warning from spectre during initial setup.
    WARNING (CMI-2826): R0_4__dmy0.rmain: No model and instance parameter is given.
    WARNING (CMI-2826): R0_4__dmy0.rend: No model and instance parameter is given.
    WARNING (CMI-2826): R0_3__dmy0.rmain: No model and instance parameter is given.
    WARNING (CMI-2826): R0_3__dmy0.rend: No model and instance parameter is given.
    WARNING (CMI-2826): R0_2__dmy0.rmain: No model and instance parameter is given.
        Further occurrences of this warning will be suppressed.
Notice from spectre during topology check.
    No DC path from node `R1_1__dmy0' to ground, Gmin installed to provide path.
    No DC path from node `R1_2__dmy0' to ground, Gmin installed to provide path.
    No DC path from node `R1_3__dmy0' to ground, Gmin installed to provide path.
    No DC path from node `net4' to ground, Gmin installed to provide path.
    No DC path from node `R0_1__dmy0' to ground, Gmin installed to provide path.
        Further occurrences of this notice will be suppressed.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.