Community Custom IC Design Temperature Variation to only one FET?

Stats

  • Locked Locked
  • Replies 3
  • Subscribers 126
  • Views 13110
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Temperature Variation to only one FET?

Kimn

Hello there,

 

I'm designing an OTA circuit and want to give a temperature range variation to only one device (Q1) which is one of the input for the ifferential pair and see how its temp variation affects to the circuit.

 I have tried parametric analysis for the temperature sweep; but i've found that it is effective to the whole circuit not the Q1. Also I've tried changing Temperature rise from ambient for the Q1. but notice that it can't be set up as a range of temperature.

 

Is there any way to solve this problem?

Please help! 

 

Thanks in advance. 

 

Kim 

  • Hi Kim

    Temperature sweep applies for the entire circuit so you will not be able to achieve your objective using temperature sweep. How about sweeping "trise" (temperature rise from ambient) parameter on your fet device? You can add a "trise" parameter to your device if it does not exists.


    Best regards
    Quek

  • Hello Quek,

     

    Thanks for the reply. If you meat "Temperature Rise from Ambient" by trise, i did try. but found that  it doesnt let me set up a range of temperature. it only allows a specific value of temperature..  Or if you meant other thing by trise, i cant find the parameter. would you let me know how i can add it?

     

    Thanks for help.

    Kim 

  • Hi Kim

    You can sweep trise as shown in the picture below.

    Best regards
    Quek

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.