Stats

  • Locked Locked
  • Replies 14
  • Subscribers 125
  • Views 26999
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Calibre and Assura missing from my layout menu

wgtkan
Calibre and Assura menu is missing from my layout window. The PDK came with no configuration tempelates (.cdsinit or .cdsenv). I read the documentation but couldn’t find any help. What should I do to resolve this issue.

Thank you.
Parents

  • For Assura, all you should need to do is to:

    1. Make sure your have ASSURA installed (and an version corresponding to your IC release - so a "615" version for IC615, a "5141" version for IC5141 - there are different choices on downloads.cadence.com under ASSURA41)
    2. Set the UNIX env var ASSURAHOME to point to the installation directory of your Assura - e.g. "setenv ASSURAHOME /path/to/ASSURA41-615"
    3. The UNIX path set correctly, for example:
      set path =($ASSURAHOME/tools/bin $path)

    That's it. For Calibre, you should read the Mentor documentation - but it's a matter of setting appropriate UNIX env vars, setting up your path, and loading some code from your .cdsinit (if my memory is correct).

    Neither of these things is something that the PDK would take care of, I believe - it's more of a software installation/setup problem.

    Regards,

    Andrew.

Reply

  • For Assura, all you should need to do is to:

    1. Make sure your have ASSURA installed (and an version corresponding to your IC release - so a "615" version for IC615, a "5141" version for IC5141 - there are different choices on downloads.cadence.com under ASSURA41)
    2. Set the UNIX env var ASSURAHOME to point to the installation directory of your Assura - e.g. "setenv ASSURAHOME /path/to/ASSURA41-615"
    3. The UNIX path set correctly, for example:
      set path =($ASSURAHOME/tools/bin $path)

    That's it. For Calibre, you should read the Mentor documentation - but it's a matter of setting appropriate UNIX env vars, setting up your path, and loading some code from your .cdsinit (if my memory is correct).

    Neither of these things is something that the PDK would take care of, I believe - it's more of a software installation/setup problem.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.