Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 13517
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

virtuoso VXL module generate problem

Skill Designer

Hello~ everyone~!

I have to use the vrtuoso VXL seems to be a bit of a problem.

Use the module generation in schematicXL, I make a consistant. and Made at the schematic that have come from the layout view.

Okay until here. Erase everything that is on the layout view.

then, strange pcell pattern is shown when i click the "update components and nets" button in layoutXL view.

schematic symbol and module in layout have different properties.

What is the problem and how to solve this?

Parents

  • Hello,

    I would guess that you are talking about constraints and a modgen constraint in particular?  If this is the case then you can update the layout constraints using the 6th icon that has a yellow arrow in it: "Update all layout constraints from schematic", in case somehow you have modified the modgen constraint in the the schematic constraint manager but not regenerated the layout since.  If you use Generate All From Source (or "Connectivity -> Generate -> All from Source") then the layout should pull the latest schematic components and constraints.

    I'm guessing here, so if this does not help, as Andrew requested, please upload any image(s) that might help explain the issue, along with a more detailed description.

    Best regards,

    Lawrence.

Reply

  • Hello,

    I would guess that you are talking about constraints and a modgen constraint in particular?  If this is the case then you can update the layout constraints using the 6th icon that has a yellow arrow in it: "Update all layout constraints from schematic", in case somehow you have modified the modgen constraint in the the schematic constraint manager but not regenerated the layout since.  If you use Generate All From Source (or "Connectivity -> Generate -> All from Source") then the layout should pull the latest schematic components and constraints.

    I'm guessing here, so if this does not help, as Andrew requested, please upload any image(s) that might help explain the issue, along with a more detailed description.

    Best regards,

    Lawrence.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.