Stats

  • Locked Locked
  • Replies 2
  • Subscribers 126
  • Views 13914
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LVS switches needed for extraction of additional parameters for MOSFETS in PVS

sohaiba

Hello everyone,

 Please can anyone indicate the LVS switches required for extraction of intrinsic capacitance etc for MOSFETS in PVS/LVS. I know that for calibre we can use "PEX_RUN=TRUE " to acheive this.

 

Regards

 

Parents

  • Hi Sohaib

    PVS does not extract parasitic capacitance. This is done by the downstream tool QRC. Some foundries use the same PEX_RUN switch in PVS decks to enable the extraction of special lvs parameters. If such a switch is present in your deck, I think you can also enable it.

    Best regards
    Quek

Reply

  • Hi Sohaib

    PVS does not extract parasitic capacitance. This is done by the downstream tool QRC. Some foundries use the same PEX_RUN switch in PVS decks to enable the extraction of special lvs parameters. If such a switch is present in your deck, I think you can also enable it.

    Best regards
    Quek

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.