Stats

  • Locked Locked
  • Replies 8
  • Subscribers 127
  • Views 19404
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Have problem in ADE XL in simulating corner

xianweng

hi,Andrew

Hope you have a good day.My cadence version is IC615-64b.when I simulated corner with ADE XL ,some of them successed,but most of them failed.I totally have 135 corner. I choose signle run.I did tran analysis.

it hint error like this:  *error* close:error closing file,*error* during netlisting of design for the point,*error* error ID=5012,*error* error msg=failed to creat netlist

 When I open debug enviroment in ADE XL on these corner doing tran,it could not generate netlist.But if I use ADE L doing tran only for these corner,it work fine.If I use ADE L doing dc and tran (dc first ,then tran),it hint  sst2 error:No space left on device.This is strange.

 

Thanks any help in advance 

 

Parents

  •  Hi,

    By the way, I run some corner doing dc ,I set one net expression in output setup tab,after simulation,results tab show dc value of that net across different coner like a table. If I want another net show its dc value  like that ,how to to it without run simulation again

      First, make sure your active setup correspondens to your simulation run which you want to modifiy. If you are not sure, switch to 'Data View' assistant and right click on your history item and select 'Load Setup to Active'.

    Then go to the 'Outputs Setup' tab and add another expression, just as usual. After that, switch to the 'Results' tab and click on  the 'Re-Evaluation' Button (yellow box).The new result will be added and your results database will be updated.

     Find details in the help: 'Re-evaluating Expressions and Specifications' in ADE XL User Guide

Reply

  •  Hi,

    By the way, I run some corner doing dc ,I set one net expression in output setup tab,after simulation,results tab show dc value of that net across different coner like a table. If I want another net show its dc value  like that ,how to to it without run simulation again

      First, make sure your active setup correspondens to your simulation run which you want to modifiy. If you are not sure, switch to 'Data View' assistant and right click on your history item and select 'Load Setup to Active'.

    Then go to the 'Outputs Setup' tab and add another expression, just as usual. After that, switch to the 'Results' tab and click on  the 'Re-Evaluation' Button (yellow box).The new result will be added and your results database will be updated.

     Find details in the help: 'Re-evaluating Expressions and Specifications' in ADE XL User Guide

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.