Stats

  • Locked Locked
  • Replies 8
  • Subscribers 127
  • Views 19404
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Have problem in ADE XL in simulating corner

xianweng

hi,Andrew

Hope you have a good day.My cadence version is IC615-64b.when I simulated corner with ADE XL ,some of them successed,but most of them failed.I totally have 135 corner. I choose signle run.I did tran analysis.

it hint error like this:  *error* close:error closing file,*error* during netlisting of design for the point,*error* error ID=5012,*error* error msg=failed to creat netlist

 When I open debug enviroment in ADE XL on these corner doing tran,it could not generate netlist.But if I use ADE L doing tran only for these corner,it work fine.If I use ADE L doing dc and tran (dc first ,then tran),it hint  sst2 error:No space left on device.This is strange.

 

Thanks any help in advance 

 

Parents

  • Hi Vivek,

    You can overwrite a history item by selecting Options->Save...  In the Save options form, check the Overwrite History checkbox and select the desired history to overwrite in the cyclic field.

     There is no easy way from the UI to re-run all history items, but it could probably be done programmatically.

     Regards,

    TOM

Reply

  • Hi Vivek,

    You can overwrite a history item by selecting Options->Save...  In the Save options form, check the Overwrite History checkbox and select the desired history to overwrite in the cyclic field.

     There is no easy way from the UI to re-run all history items, but it could probably be done programmatically.

     Regards,

    TOM

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.