Stats

  • Locked Locked
  • Replies 5
  • Subscribers 126
  • Views 3744
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

libManager Qt Warning -> errors

kennethbrun

I run IC615 on a RHEL5 server. It used to work fine, but now I updated my client machine to Fedora 19, and this gives some strange errors in the library manager.

Virtuoso version: --

Program: @(#)$CDS: virtuoso version 6.1.5 03/11/2013 22:51 (sjfdl066) $

Sub version: sub-version IC6.1.5.500.16.2 (32-bit addresses)

--

 

 

The Library Manager is completely useless and doesnt respond to any mouse actions (other than giving endless errors as the example below).

 

Any ideas on how to debug it?

From Virtuoso window:

--

Xlib: sequence lost (0x107f2 > 0x19ab) in reply type 0x0!

libManager Qt Warning: X Error: 0 0

Major opcode: 113 (X_KillClient)

Resource id: 0x18b0000

Xlib: sequence lost (0x10000 > 0x19ab) in reply type 0x0!

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0xff7ff87f

Xlib: sequence lost (0x10000 > 0x19ac) in reply type 0x2!

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

Xlib: sequence lost (0x10000 > 0x19b3) in reply type 0x0!

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

libManager Qt Warning: X Error: 0 0

Major opcode: 0 ()

Resource id: 0x0

Xlib: sequence lost (0x1411c > 0x19b3) in reply type 0x1c!

Xlib: sequence lost (0x1230f > 0x19b3) in reply type 0xf!

Xlib: sequence lost (0x10201 > 0x19b3) in reply type 0x1!

libManager Qt Warning: Qt-subapplication: Fatal IO error: client killed

--

 

Parents

  • Not really a supported combination, but it's most likely to be an issue with the X server implementation in Fedora 19 (a bit on the bleeding edge!).

    Probably best to contact customer support, and then we can see if it's possible to take a look internally - although strictly speaking we can't support every type of display going - because that ends up being an enormous test matrix.

    Regards,

    Andrew.

Reply

  • Not really a supported combination, but it's most likely to be an issue with the X server implementation in Fedora 19 (a bit on the bleeding edge!).

    Probably best to contact customer support, and then we can see if it's possible to take a look internally - although strictly speaking we can't support every type of display going - because that ends up being an enormous test matrix.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.