Stats

  • Locked Locked
  • Replies 3
  • Subscribers 125
  • Views 14208
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DC Temperature sweep at an offset

Flyyn Rider

Hi,

I am using Temperature DC sweep in my simulations using Cadence 6. Can I sweep temperature at an offset instead of DC? like for example at 2ms. 

Parents
  • I am making a DC Temperature sweep. I mean I am running a DC simulation and my sweep variable is temperature (-150 to 150). I am measuring a certain voltage at all these temperature values but the cadence measures voltage values for DC sweep at time=0. Can I make it measure voltage for this temperature range at 2ms instead at time=0. I have explored various options and it seems not possible. Still any input might be helpful.
Reply
  • I am making a DC Temperature sweep. I mean I am running a DC simulation and my sweep variable is temperature (-150 to 150). I am measuring a certain voltage at all these temperature values but the cadence measures voltage values for DC sweep at time=0. Can I make it measure voltage for this temperature range at 2ms instead at time=0. I have explored various options and it seems not possible. Still any input might be helpful.
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.