Stats

  • Locked Locked
  • Replies 7
  • Subscribers 126
  • Views 16933
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to create a final netlist from ADE-XL with global variables using Skill?

adeuser777

I am trying to create a netlist from ADE-XL through skill command. My intention is to create the same netlist which ADE-XL creates when user clicks "Run" button in ADE-XL.

 

I tried following options. But all of them don't take "Global Variables" in to account.

 

createFinalNetlist

asiFinalNetlist

asiExecuteFlowChart(o_session 'asiComposeSimInput)

 

Is there any other way to achieve this?

 

Thanks,
Ram 

 

 

Parents

  • The problem is that there is no single "final netlist" in ADE XL. If you have multiple tests, multiple corners, sweeps, parameters etc, the netlist will be different for each simulation point. So it doesn't really make sense to have a "final netlist".

    Why do you want to do this anyway? It will create the netlists automatically at simulation time.

    Note that the functions you are using are effectively the ADE L way of doing things - which is essentially what you'd get if you do a Netlist->Create from the right mouse button menu over the test - this is a netlist only using info from that test, and not from the global setup. It's there for debugging reasons and really because it is inherited from ADE L.

    Regards,

    Andrew.

Reply

  • The problem is that there is no single "final netlist" in ADE XL. If you have multiple tests, multiple corners, sweeps, parameters etc, the netlist will be different for each simulation point. So it doesn't really make sense to have a "final netlist".

    Why do you want to do this anyway? It will create the netlists automatically at simulation time.

    Note that the functions you are using are effectively the ADE L way of doing things - which is essentially what you'd get if you do a Netlist->Create from the right mouse button menu over the test - this is a netlist only using info from that test, and not from the global setup. It's there for debugging reasons and really because it is inherited from ADE L.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.