Stats

  • Locked Locked
  • Replies 3
  • Subscribers 128
  • Views 1650
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

.cdsplotinit setting for plotting on 11*17

armthy

 Hello,

We added a new printer (Ricoh MP C3502). I was able to add it to .cdsplotinit and print both color and B&W in A size.

How do I make it print B size? What should the B Size 11*17 syntax read?

I have been experimenting but it always prints only on A size. Below is my printer information.

                pkgrd03|Ricoh MP C3502: \

                :manufacturer=Hewlett-Packard: \

                :type=postscript2: \

                :spool=lp -dpkgrd03 -o nobanner: \

                :query=lpstat -opkgrd03: \

                :remove=cancel $1 pkgrd03: \

                :resolution#1016: \

                :maximumPages#10: \

                :black#1:cyan#1:magenta#1:yellow#1:blue#1:red#1:green#1:white#1: \

                :paperSize="A" 7500 10100: \

                :paperSize="Legal" 7500 13150: \

                :paperSize="A4" 7350 11170 330 330:  \

               :paperSize="B" 3165 4953 66 86:

Parents
  • Miguel V

    Hi Quek,

    The link to that article is dead so I cannot view it, ut I am having the same issue.  Here is my .cdsplotinit:

    Secure_Print|Canon iR-ADV C5250/5255 PPD: \
         :manufacturer=Canon: \
         :type=postscript2: \
         :spool="lp -onobanner -o sides=one-sided -dSecure_Print": \
         :query=lpstat -oSecure_Print: \
         :remove=cancel $1 Secure_Print: \
         :resolution#1016: \
         :maximumPages#10: \
         :residentFonts: \
         :PPDFile=/etc/cups/ppd/Secure_Print.ppd: \
         :paperSize="Letter" 612 792: \
         :paperSize="11x17" 792 1224:

    Ever time I try to print to 11x17, it prints to "Letter" rather than the correct 11x17 tray.  What more do I need to add to my .cdsplotinit to get it to print to the correct tray?

Reply
  • Miguel V

    Hi Quek,

    The link to that article is dead so I cannot view it, ut I am having the same issue.  Here is my .cdsplotinit:

    Secure_Print|Canon iR-ADV C5250/5255 PPD: \
         :manufacturer=Canon: \
         :type=postscript2: \
         :spool="lp -onobanner -o sides=one-sided -dSecure_Print": \
         :query=lpstat -oSecure_Print: \
         :remove=cancel $1 Secure_Print: \
         :resolution#1016: \
         :maximumPages#10: \
         :residentFonts: \
         :PPDFile=/etc/cups/ppd/Secure_Print.ppd: \
         :paperSize="Letter" 612 792: \
         :paperSize="11x17" 792 1224:

    Ever time I try to print to 11x17, it prints to "Letter" rather than the correct 11x17 tray.  What more do I need to add to my .cdsplotinit to get it to print to the correct tray?

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.