Stats

  • Locked Locked
  • Replies 5
  • Subscribers 125
  • Views 19408
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem in reading-in in Spectre

SaeedR

 Hi dear fellows,

 I just upgraded my Cadence from version 5 to 6. In version 5, there was a portAdapter componentwhich was in rfExamples library. After upgrading to version 6 and adding the same library, I can still drag and drop the portAdapter to the schematic but there is a problem while doing the simulation. The error after any simulation is as follows:

 Error found by spectre in `portAdapter', during circuit read-in.
    ERROR (SFE-874): "input.scs" 16: Unexpected comma ",". Expected close parenthesis.
    ERROR (SFE-683): "input.scs" 16: Badly formed parameters statement.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
Warning from spectre in `portAdapter', during circuit read-in.
    WARNING (SFE-702): "input.scs" 16: Use of the comma character in node lists is not supported.
Error found by spectre in `portAdapter', during circuit read-in.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-678): "input.scs" 16: Statement is not in Spectre format. Use `simulator lang=spice' to introduce spice language sections.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-874): "input.scs" 16: Unexpected operator "*". Expected end of file or end of line.
    ERROR (SFE-678): "input.scs" 16: Statement is not in Spectre format. Use `simulator lang=spice' to introduce spice language sections.
Error found by spectre during circuit read-in.
    ERROR (SFE-874): "input.scs" 59: Unexpected comma ",". Expected close parenthesis.

 

Would you please let me know if you had this problem befroe and how you figured it out.

 

Thanks

Saeed

Parents
  • SaeedR

     Hi dear Andrew

    Sorry for late response. I was in IMS in Tampa last week. 

    Here is the result that I got after executing the commands you posted to me. 

     

    getVersion(t)
    "sub-version  IC6.1.5-64b.72 "

    uname -a
    Linux ict41706.vlsi.enel.ucalgary.ca 2.6.32-431.1.2.el6.x86_64 #1 SMP Thu Dec 12 13:59:19 CST 2013 x86_64 x86_64 x86_64 GNU/Linux

     

    Would you please guide me based on these info to figure this problem out.

    Regards

    Saeed

     

Reply
  • SaeedR

     Hi dear Andrew

    Sorry for late response. I was in IMS in Tampa last week. 

    Here is the result that I got after executing the commands you posted to me. 

     

    getVersion(t)
    "sub-version  IC6.1.5-64b.72 "

    uname -a
    Linux ict41706.vlsi.enel.ucalgary.ca 2.6.32-431.1.2.el6.x86_64 #1 SMP Thu Dec 12 13:59:19 CST 2013 x86_64 x86_64 x86_64 GNU/Linux

     

    Would you please guide me based on these info to figure this problem out.

    Regards

    Saeed

     

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.