Stats

  • Locked Locked
  • Replies 12
  • Subscribers 125
  • Views 19155
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CAPTAB DETAILS

auto dipper

 

hi

anyone can please let me know meaning of FIXED & VARIABLE in captab analysis under tranient analysis of ADE - cadence IC610?

 

REGARDS

Parents

  • Dear auto dipper.

    First of all, if you persist in keep appending unrelated topics onto your old posts, I for one will stop answering your questions. You have been asked several times before and reminded about the forum guidelines - and I spent some time sorting out the mess when you did it earlier in this thread. You've done it again, and unfortunately the two posts are interleaved and I'm not going to waste more time fixing it. See also my response to you a while ago when you said that you couldn't find the New Post button.

    The error in your model file is because you are referencing "nmos4" and it should be "nmos", as Shawn pointed out. This is nothing to do with analogLib, because spectre itself doesn't know about analogLib - but in SPICE syntax it works by using:

    .model MODELNAME DEVICECLASS

    where DEVICECLASS is (say) nmos, pmos, npn etc. You can't us nmos4.

    Also your simulation is complaining about other missing models. such as ami06N and ami06P, so you'll need to get those from somewhere.

    Regards,

    Andrew.

Reply

  • Dear auto dipper.

    First of all, if you persist in keep appending unrelated topics onto your old posts, I for one will stop answering your questions. You have been asked several times before and reminded about the forum guidelines - and I spent some time sorting out the mess when you did it earlier in this thread. You've done it again, and unfortunately the two posts are interleaved and I'm not going to waste more time fixing it. See also my response to you a while ago when you said that you couldn't find the New Post button.

    The error in your model file is because you are referencing "nmos4" and it should be "nmos", as Shawn pointed out. This is nothing to do with analogLib, because spectre itself doesn't know about analogLib - but in SPICE syntax it works by using:

    .model MODELNAME DEVICECLASS

    where DEVICECLASS is (say) nmos, pmos, npn etc. You can't us nmos4.

    Also your simulation is complaining about other missing models. such as ami06N and ami06P, so you'll need to get those from somewhere.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.