Stats

  • Locked Locked
  • Replies 5
  • Subscribers 127
  • Views 15832
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Layout Porting between Foundries

KKANDOTH

Hi All,

   Is It possible to port an existing layout from Foundry1 to Foundry2. Consider the existin layout has only metal & Via layers.

Thank You,

Kumar

Parents

  •  If there are compatible pcells and design rules, you may be able to get started but there is lots of potential issues.

    1. Until conversion is complete, you have a library which is in a state between two processes technologies. First, back up the design library. Make a map of the layer numbers from F1 PDK to F2 PDK. The layer data is stored as numbers in the database, although the design tools deal with layer names. Then attach the new PDK technology library. Go through all non pcells and map the layers to the new PDK. Update the via placements as well (you will have mapped them as well).

    2. For pcells, you have to replace the instances with the pcells from the new PDK. Get the parameters from the instances of the pcells from the F1 PDK and then replace the instances with the appropriate F2 PDK pcells. Map the parameters to the new pcell parameters.

    3. Run DRC and clean up the mess. LVS will probably not run because the pcells will have changed their footprint and there are gaps and shorts you will have to clean up.

    Cadence used to have a tool Migrate which would help you do this but I don't know if it is still in the catalog.

     Ted

Reply

  •  If there are compatible pcells and design rules, you may be able to get started but there is lots of potential issues.

    1. Until conversion is complete, you have a library which is in a state between two processes technologies. First, back up the design library. Make a map of the layer numbers from F1 PDK to F2 PDK. The layer data is stored as numbers in the database, although the design tools deal with layer names. Then attach the new PDK technology library. Go through all non pcells and map the layers to the new PDK. Update the via placements as well (you will have mapped them as well).

    2. For pcells, you have to replace the instances with the pcells from the new PDK. Get the parameters from the instances of the pcells from the F1 PDK and then replace the instances with the appropriate F2 PDK pcells. Map the parameters to the new pcell parameters.

    3. Run DRC and clean up the mess. LVS will probably not run because the pcells will have changed their footprint and there are gaps and shorts you will have to clean up.

    Cadence used to have a tool Migrate which would help you do this but I don't know if it is still in the catalog.

     Ted

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.