Stats

  • Locked Locked
  • Replies 4
  • Subscribers 126
  • Views 6140
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ADE XL remains in "pending" state

david0526

hello,

i decided to try ADE XL as i wanted to run temp/corner sweeps.  i was able to set everything up, but when i start the simulation, it just sits in "pending" state until the sim times-out.  has anyone encountered a similar issue, or has suggestions i can try?

thanks in advance for the help. 

Parents

  • Dear David0526,

     There is not of information to go by, but a few thoughts come to mind:

    1. Are you sure your jobs are not pending due to a license issue? In other words, if Cadence cannot get a license to start a job, it will time out at the time out setting you have specified.

    2. There is a check box in the Options->Job Setup menu to start jobs immediately. Is that checked?

    3. The various time outs are programmable. I've attached a copy of the set I use that start to submit jobs to an LSF immediately if it helps.

     

    Shawn 

Reply

  • Dear David0526,

     There is not of information to go by, but a few thoughts come to mind:

    1. Are you sure your jobs are not pending due to a license issue? In other words, if Cadence cannot get a license to start a job, it will time out at the time out setting you have specified.

    2. There is a check box in the Options->Job Setup menu to start jobs immediately. Is that checked?

    3. The various time outs are programmable. I've attached a copy of the set I use that start to submit jobs to an LSF immediately if it helps.

     

    Shawn 

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.