Stats

  • Locked Locked
  • Replies 0
  • Subscribers 125
  • Views 12761
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to mark net in Virtuoso Using FinFet technology with Cut layers.

Ronen Cohen

Hi,

I have used this feature in previous process nodes without any problem.

But now in FinFet technology the Cut layers will cause the tool to mark the other side of the cut as like a short.

For example Poly cut. How do I stop Marking the poly up to the Cut layer so it does not highlight the poly on the other side of the cut.

Other layers such as M0 cut are there with the same behavior.

Thanks in advance,

Ronen.

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.